866-997-4948(US-Canada Toll Free)

Plastic Caps and Closures Market: Global Industry Analysis 2012-2016 and Opportunity Assessment 2017-2027

Published By :

Future Market Insights

Published Date : Jan 2018

Category :

Packaging

No. of Pages : 305 Pages



Replacement of glass bottles with plastic bottles and the booming beverages industry to positively influence the growth of the global plastic caps and closures market

Due to the fragile properties of glass and its high cost, the demand for glass bottles is decreasing throughout the world and its place is being taken by plastic bottles and containers. PET bottles are being preferred over glass as they are easy to transport over long distances and to avoid breakages. Approximately 600 billion units of PET bottles are being manufactured globally to meet this increasing demand. The main uses of such plastic bottles are for the packaging of carbonated soft drinks, bottled water, juices and other ready to drink beverages. Also, the rise in demand for such kind of products in the emerging economies bodes well for the plastic caps and closures market in the coming years. Other end-use industries where plastic caps and closures are used in bottles include cosmetics and personal care, household, food and chemical products.

The beverages segment dominates the global plastic caps and closures market as there is a high demand for carbonated soft drinks, bottled water, ready-to-drink teas and coffees in the developed countries. There is increasing demand for such kind of products in the developing countries due to a rise in the disposable incomes of the middle class households in countries such as India, China, Brazil, etc. This increase in the disposable income leads to a higher consumer spending on convenience products. In addition, the demand for plastic caps and closures has also increased in other end-use industries such as the cosmetics and personal care industry.

The global plastic caps and closures market was estimated to be valued at nearly US$ 34,200 Mn in the year 2017 and is likely to reach a valuation of nearly US$ 54,800 Mn at the end of the assessment period in the year 2027. The global plastic caps and closures market is anticipated to display a CAGR of 4.8% by value during 2017-2027.

Increasing consumption of ready-to-drink beverages in the APEJ region to contribute to market revenue growth

There is an increasing consumption of ready-to-drink beverages and carbonated soft drinks in the APEJ region. This is due to rising disposable incomes of the middle class households, which leads to more spending on convenience products. Also, in some countries where the penetration of carbonated soft drinks is already high, the trend is shifting from consuming soft drinks to ready-to-drink teas and coffees. On the other hand, consumers are becoming more health conscious and the demand for healthy beverages is on the rise and this is contributing to the healthy growth of the plastic caps and closures market in the APEJ region. In addition, various international beverage companies like Coca Cola, PepsiCo, etc. are shifting their focus from developed countries and concentrating on emerging economies such as India, Thailand, ASEAN, etc. to boost their sales in the APEJ region. This trend is predicted to increase their consumer base. The rapid increase in the ready-to-drink beverages market in the APEJ is likely to boost the growth of the global plastic caps and closures market.
plastic caps and closures market

Global Plastics Caps & Closures Market Analysis, by End Use

As per the assessment of Future Market Insights, the beverages segment in the end-use category was estimated to be valued at nearly US$ 16,500 Mn in 2017 and is likely to reach a valuation of nearly US$ 27,200 Mn in the year 2027 and in the process exhibit a CAGR of 5.1% during the assessment period 2017-2027. The food segment in the end-use category was estimated to be valued at nearly US$ 5,100 Mn in 2017 and is likely to reach a figure of US$ 8,000 Mn in the year 2027 and exhibit a CAGR of 4.6% during the period of forecast.
Table Of Content

1.Executive Summary

1.1. Market Overview

1.2. Market Analysis

1.3. FMI Analysis and Recommendations

1.4. Wheel of Opportunity

2. Market Introduction

2.1. Market Definition

2.2. Market Taxonomy

3. Market Viewpoint

3.1. Macro-Economic Factors

3.1.1. Global Packaging Industry Outlook

3.1.2. Top 30 Beverage Companies in the World

3.2. Opportunity Analysis

4. Global Plastics Caps & Closures Market Analysis

4.1. Market Volume Projection

4.2. Market Size and Y-o-Y Growth

4.3. Absolute $ Opportunity

4.4. Value Chain Analysis

4.5. Caps & Closures Consumption, by Key Countries

5. Global Plastics Caps & Closures Market Analysis By Region

5.1. Introduction

5.2. Historical Market Size (US$ Mn) and Volume (Mn Units) Analysis 2012-2016 By Region

5.2.1. North America

5.2.2. Asia Pacific Excl. Japan (APEJ)

5.2.3. Western Europe

5.2.4. Eastern Europe

5.2.5. Latin America

5.2.6. Middle East & Africa

5.2.7. Japan

5.3. Current Market Size (US$ Mn) and Volume (Mn Units) Forecast 2017-2027 By Region

5.3.1. North America

5.3.2. Asia Pacific Excl. Japan (APEJ)

5.3.3. Western Europe

5.3.4. Eastern Europe

5.3.5. Latin America

5.3.6. Middle East & Africa

5.3.7. Japan

5.4. Market Attractiveness Analysis By Region

6. Global Plastics Caps & Closures Market Analysis By Cap Type

6.1. Introduction

6.2. Historical Market Size (US$ Mn) and Volume (Mn Units) Analysis 2012-2016 By Cap Type

6.2.1. Screw Closures

6.2.2. Snap Closures

6.2.3. Push-Pull Closures

6.2.4. Others

6.3. Current Market Size (US$ Mn) and Volume (Mn Units) Forecast 2017-2027 By Cap Type

6.3.1. Screw Closures

6.3.2. Snap Closures

6.3.3. Push-Pull Closures

6.3.4. Others

6.4. Market Attractiveness Analysis By Cap Type

6.5. Key Trends

7. Global Plastics Caps & Closures Market Analysis By Material Type

7.1. Introduction

7.2. Historical Market Size (US$ Mn) and Volume (Mn Units) Analysis 2012-2016 By Material Type

7.2.1. Thermoplastics

7.2.1.1. PE

7.2.1.1.1. LDPE/LLDPE

7.2.1.1.2. HDPE

7.2.1.2. PP

7.2.1.3. Others (PS, PET, etc.)

7.2.2. Thermosets

7.3. Current Market Size (US$ Mn) and Volume (Mn Units) Forecast 2017-2027 By Material Type

7.3.1. Thermoplastics

7.3.1.1. PE

7.3.1.1.1. LDPE/LLDPE

7.3.1.1.2. HDPE

7.3.1.2. PP

7.3.1.3. Others (PS, PET, etc.)

7.3.2. Thermosets

7.4. Market Attractiveness Analysis By Material Type

7.5. Key Trends

8. Global Plastics Caps & Closures Market Analysis By End Use

8.1. Introduction

8.2. Historical Market Size (US$ Mn) and Volume (Mn Units) Analysis 2012-2016 By End Use

8.2.1. Beverages

8.2.1.1. Non-Carbonated Drinks

8.2.1.1.1. Alcoholic Beverages

8.2.1.1.2. Bottled Water

8.2.1.1.3. Fruit Beverages

8.2.1.1.4. Ready to Drink Beverages

8.2.1.1.5. Sports Drinks

8.2.1.2. Carbonated Drinks

8.2.2. Food

8.2.3. Pharmaceuticals

8.2.4. Household

8.2.5. Cosmetics & Personal Care

8.2.6. Others (Chemical & Fertilizers, etc.)

8.3. Current Market Size (US$ Mn) and Volume (Mn Units) Forecast 2017-2027 By End Use

8.3.1. Beverages

8.3.1.1. Non-Carbonated Drinks

8.3.1.1.1. Alcoholic Beverages

8.3.1.1.2. Bottled Water

8.3.1.1.3. Fruit Beverages

8.3.1.1.4. Ready to Drink Beverages

8.3.1.1.5. Sports Drinks

8.3.1.2. Carbonated Drinks

8.3.2. Food

8.3.3. Pharmaceuticals

8.3.4. Household

8.3.5. Cosmetics & Personal Care

8.3.6. Others (Chemical & Fertilizers, etc.)

8.4. Market Attractiveness Analysis By End Use

8.5. Key Trends

9. North America Plastics Caps & Closures Market Analysis

9.1. Introduction

9.2. Regional Pricing Analysis

9.3. Market Dynamics

9.3.1. Drivers

9.3.2. Restraints

9.3.3. Trends

9.4. Historical Market Size (US$ Mn) and Volume (Mn Units) Analysis 2012-2016 By Country

9.4.1. U.S.

9.4.2. Canada

9.5. Current Market Size (US$ Mn) and Volume (Mn Units) Forecast 2017-2027 By Country

9.5.1. U.S.

9.5.2. Canada

9.6. Historical Market Size (US$ Mn) and Volume (Mn Units) Analysis 2012-2016 By Cap Type

9.6.1. Screw Closures

9.6.2. Snap Closures

9.6.3. Push-Pull Closures

9.6.4. Others

9.7. Current Market Size (US$ Mn) and Volume (Mn Units) Forecast 2017-2027 By Cap Type

9.7.1. Screw Closures

9.7.2. Snap Closures

9.7.3. Push-Pull Closures

9.7.4. Others

9.8. Historical Market Size (US$ Mn) and Volume (Mn Units) Analysis 2012-2016 By Material Type

9.8.1. Thermoplastics

9.8.1.1. PE

9.8.1.1.1. LDPE/LLDPE

9.8.1.1.2. HDPE

9.8.1.2. PP

9.8.1.3. Others (PS, PET, etc.)

9.8.2. Thermosets

9.9. Current Market Size (US$ Mn) and Volume (Mn Units) Forecast 2017-2027 By Material Type

9.9.1. Thermoplastics

9.9.1.1. PE

9.9.1.1.1. LDPE/LLDPE

9.9.1.1.2. HDPE

9.9.1.2. PP

9.9.1.3. Others (PS, PET, etc.)

9.9.2. Thermosets

9.10. Historical Market Size (US$ Mn) and Volume (Mn Units) Analysis 2012-2016 End Use

9.10.1. Beverages

9.10.1.1. Non-Carbonated Drinks

9.10.1.1.1. Alcoholic Beverages

9.10.1.1.2. Bottled Water

9.10.1.1.3. Fruit Beverages

9.10.1.1.4. Ready to Drink Beverages

9.10.1.1.5. Sports Drinks

9.10.1.2. Carbonated Drinks

9.10.2. Food

9.10.3. Pharmaceuticals

9.10.4. Household

9.10.5. Cosmetics & Personal Care

9.10.6. Others (Chemical & Fertilizers, etc.)

9.11. Current Market Size (US$ Mn) and Volume (Mn Units) Forecast 2017-2027 By End Use

9.11.1. Beverages

9.11.1.1. Non-Carbonated Drinks

9.11.1.1.1. Alcoholic Beverages

9.11.1.1.2. Bottled Water

9.11.1.1.3. Fruit Beverages

9.11.1.1.4. Ready to Drink Beverages

9.11.1.1.5. Sports Drinks

9.11.1.2. Carbonated Drinks

9.11.2. Food

9.11.3. Pharmaceuticals

9.11.4. Household

9.11.5. Cosmetics & Personal Care

9.11.6. Others (Chemical & Fertilizers, etc.)

9.12. Drivers and Restraints: Impact Analysis

9.13. Key Representative Market Participants

9.14. Competitor Market Presence (Intensity Map)

10. Asia Pacific Excluding Japan (APEJ) Plastics Caps & Closures Market Analysis

10.1. Introduction

10.2. Regional Pricing Analysis

10.3. Market Dynamics

10.3.1. Drivers

10.3.2. Restraints

10.3.3. Trends

10.4. Historical Market Size (US$ Mn) and Volume (Mn Units) Analysis 2012-2016 By Country

10.4.1. China

10.4.2. India

10.4.3. ASEAN

10.4.4. Australia and New Zealand

10.4.5. Rest of APEJ

10.5. Current Market Size (US$ Mn) and Volume (Mn Units) Forecast 2017-2027 By Country

10.5.1. China

10.5.2. India

10.5.3. ASEAN

10.5.4. Australia and New Zealand

10.5.5. Rest of APEJ

10.6. Historical Market Size (US$ Mn) and Volume (Mn Units) Analysis 2012-2016 By Cap Type

10.6.1. Screw Closures

10.6.2. Snap Closures

10.6.3. Push-Pull Closures

10.6.4. Others

10.7. Current Market Size (US$ Mn) and Volume (Mn Units) Forecast 2017-2027 By Cap Type

10.7.1. Screw Closures

10.7.2. Snap Closures

10.7.3. Push-Pull Closures

10.7.4. Others

10.8. Historical Market Size (US$ Mn) and Volume (Mn Units) Analysis 2012-2016 By Material Type

10.8.1. Thermoplastics

10.8.1.1. PE

10.8.1.1.1. LDPE/LLDPE

10.8.1.1.2. HDPE

10.8.1.2. PP

10.8.1.3. Others (PS, PET, etc.)

10.8.2. Thermosets

10.9. Current Market Size (US$ Mn) and Volume (Mn Units) Forecast 2017-2027 By Material Type

10.9.1. Thermoplastics

10.9.1.1. PE

10.9.1.1.1. LDPE/LLDPE

Make an enquiry before buying this Report

Please fill the enquiry form below.

  • Full Name *
  • Your Email *
  • Job Title
  • Company
  • Phone No. * (Pls. Affix Country Code)
  • Message
  • Security Code *