Medical Waste Incinerators Market - Global Industry Analysis, Size, Share, Growth Trends, and Forecast 2016 - 2024
- Transparency Market Research
- Medical Equipments
Medical Waste Incinerators Market: Overview
Medical waste incinerator is mainly used for burning wastes produced by medical research facilities, veterinary facilities and hospitals. These wastes generally include both infectious medical wastes as well as non-infectious, general housekeeping wastes. Three types of incinerators are used for burning wastes: controlled air incinerators, excess air incinerators, and rotary kiln incinerators. Controlled air incinerators are dominantly used medical waste technology, and controls the market for new technology systems at numerous hospitals. This type of technology is also referred to as starved-air incineration or two-stage incineration.
Combustion of waste in controlled air incinerators takes place in two stages. In first stage, waste is injected into the primary combustion chamber, which is then operated with substantial amount of air required to carry out combustion process. Combustion air enters through the primary chamber from below the incinerator hearth. This air is known as primary air. Primary chamber, the low air fuel ratio facilitates the volatilization of the waste, and large percentage of the residual carbon in the ash burns.
In second stage, excess air is then added to volatile gases produced in the primary chamber to complete the combustion process. Secondary chamber temperature is generally higher than primary chamber temperature. Depending on the moisture content and heating value of the waste, extra amount of heat may be required. This can be achieved by auxiliary burners located at the entrance of the secondary chamber to maintain the desired temperature.
Medical Waste Incinerators Market: Product Insight
Waste feed for controlled air incinerators generally range from small to high quantities. Waste feed and ash removal can be manual or an automatic process, depending on the unit size and specifications. Throughput capacities for lower heat wastes are very high, since feed capacities are generally restricted by primary chamber heat discharge rates. Owing of very low air addition rates in the primary chamber, and due to the low flue gas velocities, the quantity of solids present in the gases exiting the primary chamber is very low. Hence, high percentage of the controlled air incinerators generally do not have special gas cleaning equipment or devices.
Excess air incinerators are generally small modular units. They are also known as multiple chamber incinerators or batch incinerators. Excess air incinerators are usually a compact cube with a series of baffles and internal chambers. They can be operated continuously without any break and are generally operated in a batch mode. Incinerators are specially designed to burn any type of hospital waste operating at excess air levels. Pathological wastes are generally combusted at air level near 100%. The excess air helps in maintaining high chamber temperature when burning high moisture content waste. In excess air incinerators waste feed capacities for are generally lies in the range of 3.8 kg/min or similar.
Rotary kiln type incinerators are especially manufactured with a primary
chamber, in which the waste is heated and is then volatilized. It also has
called as secondary chamber, where combustion process of the volatile fractions takes place. Primary chamber comprises an inclined, rotating kiln in which waste move from the feed point to the ash discharge point. The waste feed rate is then monitored by calibrating the angle of inclination and the rate of kiln rotation. Combustion air is then injected by a primary chamber through a port. An additional burner is usually needed to start the combustion process and maintains the desired the combustion temperatures.
Medical Waste Incinerators Market: Key Competitors
Some of the key companies in the business of medical waste incinerators are Aravali Thermal & Environmental Engineers, Alfa-therm Limited, Therm-Tec, Inc., Spectrum Environmental Group, ATICO Medical Pvt. Ltd., Microteknik, and Haat Burning Solutions.
The report offers a comprehensive evaluation of the market. It does so via in-depth insights, understanding market evolution by tracking historical developments, and analyzing the present scenario and future projections based on optimistic and likely scenarios. Each research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology developments, types, applications, and the competitive landscape.
The study is a source of reliable data on:
- Key market segments and sub-segments
- Evolving market trends and dynamics
- Changing supply and demand scenarios
- Quantifying market opportunities through market sizing and market forecasting
- Tracking current trends/opportunities/challenges
- Competitive insights
- Opportunity mapping in terms of technological breakthroughs
The regional analysis covers:
- North America (U.S. and Canada)
- Latin America (Mexico, Brazil, Peru, Chile, and others)
- Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, Luxembourg)
- Eastern Europe (Poland, Russia)
- Asia Pacific (China, India, Japan, ASEAN, Australia and New Zealand)
- Middle East and Africa (GCC, Southern Africa, North Africa)
TMR estimates the market size of various sectors using a combination of available data on the number and revenue of companies within each sub-sector and tiers of companies. The basic components used to determine market size and forecast for a specific product area are not only limited to supply-side data, but are also related to demand, industry trends, and the economic outlook. All the above data points are utilized to generate a statistical model targeting the sector marketplace. More than 300 TMR analysts across the world integrate these elements into a framework to determine the subsector market size for a base year and then forecast growth within each market.
TMR regularly interviews technology and business professionals as an ongoing effort to track the latest developments within each sector. These continuous surveys are stratified by company size and industry segment and weighted to reflect the global market place. All data are collected on an ongoing effort through a structured questionnaire rolled over the web or conducted via telephones. This provides the TMR team opportunities to request for detailed question sets, complex skip patterns, and real-time calculations, which assists respondents in answering questions involving numbers and percentages. Respondents, who are interviewed as experts, are screened and qualified based on certain criteria in addition to their decision-making authority and the scope of activity within their organizations.
Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.
Have query on this report?Make an Enquiry
The team was the biggest help to us. Not only were we provided with customized solutions but also we were guided through the most complicated situations. The information was on-point yet comprehensive. The experience was absolutely satisfying and helped us turn many challenges into opportunities.
Ours is a startup with a unique set of challenges and we were therefore hesitant but the team totally put us at ease with their knowledge and expertise. Our business and its challenges were understood perfectly and help was extended accordingly. The tailor made approach really helped us gain the most informative insights.
The report repository is absolutely impressive –updated and exhaustive in terms of markets covered and information provides. Besides, with the support extended to us by the team, we could reduce costs as well as move to sustainable growth. This really helped us tap into new opportunities. Happy to have gone ahead with ResearchMos.us.
We have had a long term engagement with ResearchMoz.us and never have we felt that the work done and help extended were below flawless. The report repository is one of the best one can hope to tap into. Recently, our partner businesses opted for consultancy services and they are all thrilled with the outcome.
Insights from reports helped us improve our profit margins significantly. Most of the knowledge we needed on the market were provided to us on a granular basis. From trends, and drivers to competitive analysis, the information was not just crisp but also insightful. That helped us chart a robust growth strategy and as of now we are happy to state that we are reaping big benefits.
More from Medical Equipments
Medical DevicesNebulizers-Medical Devices Pipeline Product Landscape, 2021