Load Switch Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2018 - 2026
- Transparency Market Research
- May 2039
- 0 pages
A load switch is an electronic component that operates like a relay but has no moving parts. It is used to turn on and off power rails in systems. Simple load switches comprise of four pins, input and output voltage, ground, and enable. When the device is turned ON through the enabled button, the current flows from the input pin to output pin of the pass FET, thereby allowing the power to pass through the downstream circuitry. The pass FET is the key part of the load switch that regulates the maximum load current and maximum input voltage that the load switch can handle. Several load switches have an internal resistor that pull the output to ground when the switch is turned off and prevent it from floating. Thus, a load switch is used to connect and disconnect a load from a source to power up or down, or to save energy when a load is not required. These switches find applications in several products including laptops, smartphones, tablets, watches and wearable, and other battery-operated devices owing to their capability of saving space and power while managing inrush current. Furthermore, they are also being used to limit the leakage current and power consumption by turning off power to the sub-systems that are used only during certain modes of operation.
Major factor driving the load switch market include its rising demand in power distribution, power sequencing, and power state transition. Many systems have limited control of sub-systems power distribution. Instead of using multiple DC-DC convertors or linear dropout regulator, load switches can be used to turn on and off sub-systems of the same input voltage. Also, by means of a load switch, power can be circulated across several loads with control for each individual load. Similarly, load switches can provide independent control of each power path to provide simplified point-of-load control for power sequencing and power state transition. Therefore, they are increasingly used in power distribution, power sequencing, and power state transition applications.
Moreover, load switch can be integrated with fault protection features such as ON pin hysteresis, reverse current protection, under voltage lock-out current limiting, and over temperature protection. Instead of implementing complex circuits through discrete components, integrated load switch is expected to reduce solution size, development time, and BOM count in certain applications in spite of its simpler design.
The load switch market can be classified on the basis of type, maximum rated current, application, and geography. In terms of product type, the load switch market can be segmented into high voltage load switch and low voltage load switch. Further, high voltage load switch can be further bifurcated into oil-immersed type and vacuum type. In terms of maximum rated current, the market can be classified into 1.25A, 1.5A, 2A, and others. Based on application, the load switch market can be segmented into telecommunication equipment, computer equipment and peripherals, televisions and set top boxes, stereo receivers, home appliances, security systems, automated test equipment, garage door openers, automotive motor controls, and others. Based on geography, the load switch market can be segmented into North America, Europe, Asia Pacific (APAC), Middle East & Africa (MEA), and South America. North America and Asia Pacific are expected to be highly attractive regions for the load switch market owing to the presence of large number of semiconductor manufacturers in these regions.
Prominent players operating in the load switch market include Analog Devices Inc., Fairchild Semiconductor Corp., NXP Semiconductors N.V., ON Semiconductor Corp, Renesas Electronics Corporation, Rohm Corporation, Skyworks Solutions, Inc., Toshiba Corporation, and Vishay Intertechnology, Inc., Siemens AG, Rohm Corporation, STMicroelectronics N.V., Diodes Inc., Semtech Corporation and Texas Instruments, Inc.
The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.
The study is a source of reliable data on:
- Market segments and sub-segments
- Market trends and dynamics
- Supply and demand
- Market size
- Current trends/opportunities/challenges
- Competitive landscape
- Technological breakthroughs
- Value chain and stakeholder analysis
The regional analysis covers:
- North America (U.S. and Canada)
- Latin America (Mexico, Brazil, Peru, Chile, and others)
- Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
- Eastern Europe (Poland and Russia)
- Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
- Middle East and Africa (GCC, Southern Africa, and North Africa)
The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.
A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.
Highlights of the report:
- A complete backdrop analysis, which includes an assessment of the parent market
- Important changes in market dynamics
- Market segmentation up to the second or third level
- Historical, current, and projected size of the market from the standpoint of both value and volume
- Reporting and evaluation of recent industry developments
- Market shares and strategies of key players
- Emerging niche segments and regional markets
- An objective assessment of the trajectory of the market
- Recommendations to companies for strengthening their foothold in the market
Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.
Have query on this report?Make an Enquiry
The team was the biggest help to us. Not only were we provided with customized solutions but also we were guided through the most complicated situations. The information was on-point yet comprehensive. The experience was absolutely satisfying and helped us turn many challenges into opportunities.
Ours is a startup with a unique set of challenges and we were therefore hesitant but the team totally put us at ease with their knowledge and expertise. Our business and its challenges were understood perfectly and help was extended accordingly. The tailor made approach really helped us gain the most informative insights.
The report repository is absolutely impressive –updated and exhaustive in terms of markets covered and information provides. Besides, with the support extended to us by the team, we could reduce costs as well as move to sustainable growth. This really helped us tap into new opportunities. Happy to have gone ahead with ResearchMos.us.
We have had a long term engagement with ResearchMoz.us and never have we felt that the work done and help extended were below flawless. The report repository is one of the best one can hope to tap into. Recently, our partner businesses opted for consultancy services and they are all thrilled with the outcome.
Insights from reports helped us improve our profit margins significantly. Most of the knowledge we needed on the market were provided to us on a granular basis. From trends, and drivers to competitive analysis, the information was not just crisp but also insightful. That helped us chart a robust growth strategy and as of now we are happy to state that we are reaping big benefits.