Crankcase Heater Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2017 - 2025
- Transparency Market Research
A crankcase heater is a component used in a heat pump system, chiller system, and an air-conditioning system in a compressor. It helps prevent compressor lockup and failure. Crankcase heater is also employed to prevent condensation of refrigerant in the crankcase of a compressor. Crankcase heater keeps the temperature of refrigerant higher than other coldest parts of the system. Crankcase heater exhibits various features such as corrosion resistance, zero heat loss, and efficient heating. This is expected to drive the crankcase heater market.
Crankcase heaters are used to avert refrigerant in the system to the compressor from reverse migrating back. These issues take place when a compressor is used in a low ambient temperature. For instance, the oil inside the compressor change state during the off-cycle. The cooled oil has higher tendency to entice refrigerant as the pressure difference between the vaporized refrigerant in the cycle. When the compressor is started during the next cycle, the oil in the refrigerant flows out of the compressor and toward the condenser. This would leave less oil to efficiently lubricate the compressor. The compressor would fail eventually or immediately. Thus, migration of refrigerant to the compressor’s crankcase during the off-cycle can significantly damage the compressor. This is anticipated to hamper the crankcase heater market.
Moreover, refrigerant migration causes an immediate drop in crankcase pressure can occur. This is estimated to cause the refrigerant and oil mixture to burst violently and can cause broken discharge valves. Crankcase heaters are manufactured to have a corrosion resistant and moisture-proof exterior, voltages through 600V with nominal power consumption, and high temperature silicon rubber elements with insulated lead wires.
The global crankcase heater market can be segmented based on application, material, end-use, and region. In terms of application, the market can be segmented into air conditioner, heat pumps, and refrigeration compressors. Crankcase heater is used in air conditioning (cooling) systems. For instance, R-22 has been widely used since the last few years. These heaters are installed in the compressors of ACs, chillers, and heat pump systems in order to heat oil. Based on material, the market can be divided into brass, stainless steel, and special steel. Each heater is custom-designed to fit and be used with a particular compressor. Because of the design of the heater, the oil is kept up to 30°F warmer than the system temperature, force the refrigerant to be rooted to its place. On the basis of end use, the market is spited into automotive, Industrial, commercial, and other segment. In which automotive holds major share for the crankcase heater market and also likely to drive the market in near future.
Based on region, the global crankcase heater market can be segregated into Asia Pacific, North America, Europe, Latin America, and Middle East & Africa. Asia Pacific is expected to hold major share of the global crankcase heater market, followed by North America and Europe, during the forecast period. China, Japan, and India are leading countries in the crankcase heater market. Rise in demand for crankcase heater in Asia Pacific can be ascribed to the growth in the automotive industry and rise in usage of air conditioners in the region.
Key players operating in the global crankcase heater market include Daspass Sales Corporation, BACKER BHV AB, Packard Inc., Solberg Manufacturing Inc, Alfdex, Tutco Heating Solutions Group, Specific Systems, Cummins Filtration Inc, MANN+HUMMEL, Metal Textiles Corporation, and PARKER HANNIFIN CORP.
The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.
The study is a source of reliable data on:
- Market segments and sub-segments
- Market trends and dynamics
- Supply and demand
- Market size
- Current trends/opportunities/challenges
- Competitive landscape
- Technological breakthroughs
- Value chain and stakeholder analysis
The regional analysis covers:
- North America (U.S. and Canada)
- Latin America (Mexico, Brazil, Peru, Chile, and others)
- Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
- Eastern Europe (Poland and Russia)
- Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
- Middle East and Africa (GCC, Southern Africa, and North Africa)
The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.
A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.
Highlights of the report:
- A complete backdrop analysis, which includes an assessment of the parent market
- Important changes in market dynamics
- Market segmentation up to the second or third level
- Historical, current, and projected size of the market from the standpoint of both value and volume
- Reporting and evaluation of recent industry developments
- Market shares and strategies of key players
- Emerging niche segments and regional markets
- An objective assessment of the trajectory of the market
- Recommendations to companies for strengthening their foothold in the market
Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.
Have query on this report?Make an Enquiry
The team was the biggest help to us. Not only were we provided with customized solutions but also we were guided through the most complicated situations. The information was on-point yet comprehensive. The experience was absolutely satisfying and helped us turn many challenges into opportunities.
Ours is a startup with a unique set of challenges and we were therefore hesitant but the team totally put us at ease with their knowledge and expertise. Our business and its challenges were understood perfectly and help was extended accordingly. The tailor made approach really helped us gain the most informative insights.
The report repository is absolutely impressive –updated and exhaustive in terms of markets covered and information provides. Besides, with the support extended to us by the team, we could reduce costs as well as move to sustainable growth. This really helped us tap into new opportunities. Happy to have gone ahead with ResearchMos.us.
We have had a long term engagement with ResearchMoz.us and never have we felt that the work done and help extended were below flawless. The report repository is one of the best one can hope to tap into. Recently, our partner businesses opted for consultancy services and they are all thrilled with the outcome.
Insights from reports helped us improve our profit margins significantly. Most of the knowledge we needed on the market were provided to us on a granular basis. From trends, and drivers to competitive analysis, the information was not just crisp but also insightful. That helped us chart a robust growth strategy and as of now we are happy to state that we are reaping big benefits.