Brush Motor Control Unit Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2017 - 2025
- Transparency Market Research
Brush Motor Control Unit Market: Market Overview
The brush motor control unit provides precision control of the speed, and it has an electric power system (EPS), which is responsible for controlling the torque of the motor drive. Brush motor control unit system makes precise current adjustments based on the steering of torque signals; which are detected by torque sensors. It, thus offers vehicle drivers a little steering assistance in the vehicle operation. Brush motor control unit consumes energy only when the steering assist is necessary. The brush motor control unit system is comparatively more fuel efficient than the conventional hydraulic power steering systems. The electrical control unit (ECU) of the brush motor control unit calculates the torque necessary for the steering assist from the engine speed and the torque sensor signal, etc. and ultimately supplies the maximum electric power to the brush motor control unit. Choosing a right type of motor control unit is critical for the overall performance of vehicle or machine in which it is used in as a component.
Brush Motor Control Unit Market: Market Dynamics
The increasing demand for fuel efficient automobiles coupled with the fact that the fuel reserve levels are going down constantly; is fueling the growth of the brush motor control unit market. The increasing demand for the cost-effective automotive parts coupled with the fact that the companies are constantly trying to reduce their operational and overall cost of production; is contributing to the growth of brush motor control unit market. However, the high initial cost of investment is a restraining factor. Another challenge faced in the expansion of the brush motor control unit market is a wide acceptance and proven performance of hydraulic steering systems. The launch of the brushless motor control units is a threat to the brush motor control unit market as they have less cost of maintenance (brushes require maintenance). The use of brush motor control units in the cabin pressure, navigation and target servos, trim controls, utility actuation and valve drives, etc., is one of the prevailing trends. Companies are also manufacturing the brush motor control units with a range of magnetic materials such as samarium cobalt alloys and neodymium. These units have low-weight with a durable performance which makes these ideal for use in a helicopter and small aircraft applications. There is an increasing preference for the brush motor control unit because it can alter or vary the speed-torque ratio in all possible ways.
Brush Motor Control Unit Market: Market Segmentation
The global brush motor control unit market can be segmented by end-use industries:
- Office Automation
- Fire Control
The global brush motor control unit market can be segmented by versions or generation of models
- First generation
- Second generation
The global brush motor control unit market can be segmented by the type of vehicle
- Heavy Commercial Vehicles
- Light Commercial Vehicle
- Multi-Utility Vehicles
Brush Motor Control Unit Market: Segmentation Overview
The second generation of the brush motor control unit consists of the electrical control unit with an entirely simplified structure. It is also compatible with the existing parts such as with the connector. The second generation brush motor control unit model provides the same output and is almost 50 % lesser in volume as compared to the first generation. Brush motor control unit also uses a new kind of microprocessor for enhanced speed of processing. Brush motor control unit also has enhanced capacity and improvised control performance than the conventional hydraulic power steering systems.
Brush Motor Control Unit Market: Regional Outlook
Geographically, the global brush motor control unit market is segmented into North America, Eastern Europe, Western Europe, Latin America, Asia-Pacific excluding Japan, Japan, and Middle East & Africa. North America and Europe hold a significant market share of brush motor control unit market owing to the demand for environment-friendly automotive parts. Furthermore, the increase in R & D activities related to automobiles and electronics, wherein brush motor control unit is a useful and economic machine component, aids in boosting the growth of its market in the region. The market in the APEJ region is more inclined towards growing demand for brush motor control unit because of the increasing demand for premium quality auto parts and automobiles.
Brush Motor Control Unit Market: Prominent Players
Some of the leading players in the global brush motor control unit market are:
- Mitsubishi Electric Corporation
- ORIENTAL MOTOR USA CORP.
- Moog Inc.
- General Electric
- Maxon Motor AG
- Texas Instruments Incorporated.
The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.
The study is a source of reliable data on:
- Market segments and sub-segments
- Market trends and dynamics
- Supply and demand
- Market size
- Current trends/opportunities/challenges
- Competitive landscape
- Technological breakthroughs
- Value chain and stakeholder analysis
The regional analysis covers:
- North America (U.S. and Canada)
- Latin America (Mexico, Brazil, Peru, Chile, and others)
- Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
- Eastern Europe (Poland and Russia)
- Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
- Middle East and Africa (GCC, Southern Africa, and North Africa)
The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.
A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.
Highlights of the report:
- A complete backdrop analysis, which includes an assessment of the parent market
- Important changes in market dynamics
- Market segmentation up to the second or third level
- Historical, current, and projected size of the market from the standpoint of both value and volume
- Reporting and evaluation of recent industry developments
- Market shares and strategies of key players
- Emerging niche segments and regional markets
- An objective assessment of the trajectory of the market
- Recommendations to companies for strengthening their foothold in the market
Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.
Have query on this report?Make an Enquiry
The team was the biggest help to us. Not only were we provided with customized solutions but also we were guided through the most complicated situations. The information was on-point yet comprehensive. The experience was absolutely satisfying and helped us turn many challenges into opportunities.
Ours is a startup with a unique set of challenges and we were therefore hesitant but the team totally put us at ease with their knowledge and expertise. Our business and its challenges were understood perfectly and help was extended accordingly. The tailor made approach really helped us gain the most informative insights.
The report repository is absolutely impressive –updated and exhaustive in terms of markets covered and information provides. Besides, with the support extended to us by the team, we could reduce costs as well as move to sustainable growth. This really helped us tap into new opportunities. Happy to have gone ahead with ResearchMos.us.
We have had a long term engagement with ResearchMoz.us and never have we felt that the work done and help extended were below flawless. The report repository is one of the best one can hope to tap into. Recently, our partner businesses opted for consultancy services and they are all thrilled with the outcome.
Insights from reports helped us improve our profit margins significantly. Most of the knowledge we needed on the market were provided to us on a granular basis. From trends, and drivers to competitive analysis, the information was not just crisp but also insightful. That helped us chart a robust growth strategy and as of now we are happy to state that we are reaping big benefits.