Automotive Solenoid Injector Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2017 - 2025
- Transparency Market Research
- Parts & Suppliers
An automotive solenoid injector operates within common rail systems of engine. They are the most frequently used supply systems of high pressure fuel to the engines. A solenoid injector enables the separation of high pressure generation function and fuel injection performance. Consequently, it provides flexibility and adaptation of the injection system to the engine, which have higher efficiency than conventional systems. Since fuel is located in the chamber with constant high pressure, it is possible to model the injection freely by means of sending electrical impulses to the injectors. A programmer and electronic control unit, supplies power to the solenoid valve of the injector, which activates the sprayer. The injection of fuel is complete after the power supply to the solenoid valve is discontinued. The amount of fuel to be injected is decided by the solenoid valve is open. It is not dependent on engine rotational speed or an injection pump.
The common rail direct injection system, in an automotive, offers additional ways of influencing the combustion process. The most important reason for this is a completely independent control over the air flow and fuel metering processes. At the same time, the high injection pressure of up to 20 MPa improves the atomization and thus, the preparation of a homogeneous mixture. By directly injecting fuel into the combustion chamber result in formation of fuel manifold-wall film, which often leads to problems in gasoline engines during transient operating conditions, is avoided. The common rail direct injection methods are preferred by automotive engine manufacturers due to the advantages mentioned above. Solenoid injectors fulfill the demand for high pressure, as they have a more sustainable internal body than that of other type of injectors. Moreover, their manufacturing cost is relatively low. The ability to maintain high pressure in the common supply line, irrespective of engine speed, is a key factor that drivers the automotive solenoid injector market. Consistent increase in demand for high efficiency engines has presented numerous opportunities for the automotive solenoid injector market.
Solenoid injectors have the ability to produce a maximum five pulses per cycle, and it is difficult to control the delivery of fuel in solenoid injectors. These factors act as key restraints for the automotive solenoid injector market.
The automotive solenoid Injector market can be segmented based on injection system, type of solenoid used, technology, and geography. In terms of injection system, the automotive solenoid injection system market can be segmented into Multi Point Fuel Injection (MPFI) system and Common Rail Direct Injection (CRDI) system. In the CRDI system, the fuel is injected directly above the piston, whereas in the MPFI system the fuel is injected in the intake manifold. Based on type of solenoid used, the automotive solenoid injector market can be segregated into AC laminated solenoid, DC C-frame solenoid, DC D-frame solenoid, linear solenoid, and rotary solenoid. AC laminated solenoid is famous for attracting force that can be applied by it in their first stroke. DC C & D-frame solenoids are named so due to the shape of covering around the coil. Linear solenoid is capable of applying a pull or push force. Based on technology, the automotive solenoid injector market can be segmented into first generation solenoid injectors and second generation solenoid injectors. Second generation solenoid injectors are able to supply fuel at a high pressure, up to 2500 bar, and can provide eight individual injections per cycle. While the first generation of automotive solenoid injectors can provide up to five individual injections per cycle.
Based on geography, the automotive solenoid Injector market can be segmented into North America, Asia Pacific, Europe, Middle East & Africa, and Rest of the World. Asia Pacific is a prominent market for automotive solenoid injectors. Increasing demand for automotive is fuelling the demand for automotive solenoid injectors.
Automotive components such as fuel injectors play a vital role in order to meet the increased demand for high efficiency automotive engines. Prominent manufacturers of solenoid injectors has great focusing on innovation for increasing the efficiency of solenoid injectors. Key players operating in the automotive solenoid injector market are Robert Bosch GmbH, Continental AG, DENSO CORPORATION, Delphi Automotive LLP, Woodward, Inc, Sentec, and Eaton.
The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.
The study is a source of reliable data on:
- Market segments and sub-segments
- Market trends and dynamics
- Supply and demand
- Market size
- Current trends/opportunities/challenges
- Competitive landscape
- Technological breakthroughs
- Value chain and stakeholder analysis
The regional analysis covers:
- North America (U.S. and Canada)
- Latin America (Mexico, Brazil, Peru, Chile, and others)
- Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
- Eastern Europe (Poland and Russia)
- Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
- Middle East and Africa (GCC, Southern Africa, and North Africa)
The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.
A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.
Highlights of the report:
- A complete backdrop analysis, which includes an assessment of the parent market
- Important changes in market dynamics
- Market segmentation up to the second or third level
- Historical, current, and projected size of the market from the standpoint of both value and volume
- Reporting and evaluation of recent industry developments
- Market shares and strategies of key players
- Emerging niche segments and regional markets
- An objective assessment of the trajectory of the market
- Recommendations to companies for strengthening their foothold in the market
Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.
Have query on this report?Make an Enquiry
The team was the biggest help to us. Not only were we provided with customized solutions but also we were guided through the most complicated situations. The information was on-point yet comprehensive. The experience was absolutely satisfying and helped us turn many challenges into opportunities.
Ours is a startup with a unique set of challenges and we were therefore hesitant but the team totally put us at ease with their knowledge and expertise. Our business and its challenges were understood perfectly and help was extended accordingly. The tailor made approach really helped us gain the most informative insights.
The report repository is absolutely impressive –updated and exhaustive in terms of markets covered and information provides. Besides, with the support extended to us by the team, we could reduce costs as well as move to sustainable growth. This really helped us tap into new opportunities. Happy to have gone ahead with ResearchMos.us.
We have had a long term engagement with ResearchMoz.us and never have we felt that the work done and help extended were below flawless. The report repository is one of the best one can hope to tap into. Recently, our partner businesses opted for consultancy services and they are all thrilled with the outcome.
Insights from reports helped us improve our profit margins significantly. Most of the knowledge we needed on the market were provided to us on a granular basis. From trends, and drivers to competitive analysis, the information was not just crisp but also insightful. That helped us chart a robust growth strategy and as of now we are happy to state that we are reaping big benefits.