ResearchMoz

Technology Trends in Lubricants (Mineral, Synthetic, and Bio-based) Market for Turbine Oil, Compressor Oil, Gear Oil, Hydraulic Oil, Bearing Oil and Heat Transfer Fluid Lubricant Applications - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2012 - 2018

Transparency Market Research
Published Date » 2013-09-21
No. Of Pages » 150
   
 Synthetic and bio-based lubricants are the major emerging lubricant products. This study highlights and explores key technology trends of synthetic, bio-based and mineral lubricants across a wide range of applications including turbine oil, compressor oil, gear oil, hydraulic oil, heat transfer fluids and bearing oil lubricants.  Some of the major qualities that differentiate between lubricants include viscosity index, water separation characteristics, thermal and oxidation stability, low volatility and low carbon formation, and anticorrosion. 
   
 This market research report, analyzes the global consumption for lubricants, estimating and forecasting the market from the consumption point of view. The lubricants market has been segmented on the basis of products,...
Table of Content

Chapter 1 Preface
1.1 Report Description
1.2 Research Scope
1.3 Market Segmentation
1.4 Research Methodology

Chapter 2 Executive Summary

Chapter 3 Lubricants Market – Industry Analysis
3.1 Introduction
3.2 Value Chain Analysis
3.3 Market Drivers
3.3.1 Increasing automobile demand
3.3.2 Reduction in crude oil dependence
3.3.3 Regulatory support for bio-based alternatives
3.4 Market Restraints
3.4.1 Volatility in mineral oil prices
3.4.2 Bio–based lubricants cost higher than mineral lubricants
3.4.3 Limited application scope of bio-based lubricants
3.5 Market Opportunities
3.5.1 Increase in R&D efforts to develop new innovative products
3.5.2 Soybean and Palm oil emerge as new source for bio-based lubricants
3.6 Lubricants market, by raw material
3.6.1 Crude Oil
3.6.2 Palm oil
3.6.3 Castor oil
3.6.4 Sunflower oil
3.6.5 Others
3.7 Porter’s five forces analysis
3.7.1 Bargaining power of suppliers
3.7.2 Bargaining power of buyers
3.7.3 Threat from new entrants
3.7.4 Threat from substitutes
3.7.5 Degree of competition
3.8 Market Attractiveness Analysis
3.8.1 Market attractiveness analysis of bio-based lubricants by application, 2011
3.8.2 Market attractiveness analysis of Group IV & V lubricants vs. mineral-oil based lubricants, 2011
3.9 Company Market Share Analysis
3.9.1 Mineral and synthetic lubricants market, company market share analysis, 2011
3.9.2 Bio-based lubricants market, company market share analysis, 2011

Chapter 4 Lubricants Market - Product Segment Analysis
4.1 Global Lubrication Market: Product Overview
4.1.1 Global lubricants market volume share, by product, 2011- 2018
4.2 Mineral Lubricants
4.2.1 Global mineral lubricants market estimates and forecast, 2011– 2018 (Kilo Tons) (USD Million)
4.2.2 Global mineral lubricants volume share, by application, 2011- 2018
4.3 Synthetic Lubricants
4.3.1 Global synthetic lubricants market estimates and forecast, 2011 – 2018 (Kilo Tons) (USD Million)
4.3.2 Global synthetic lubricants market volume share, by application, 2011- 2018
4.4 Bio-based Lubricants
4.4.1 Global bio-based lubricants market estimates and forecast, 2011 – 2018 (Kilo Tons) (USD Million)
4.4.2 Global bio-based lubricants market volume share, by application, 2011- 2018

Chapter 5 Lubricants Market – Technology Trends
5.1 Turbine oil lubrication
5.1.1 Characteristics
5.1.2 Applications
5.1.3 Trends
5.2 Compressor oil lubrication
5.2.1 Characteristics
5.2.2 Applications
5.2.3 Trends
5.3 Gear oil lubrication
5.3.1 Characteristics
5.3.2 Applications
5.3.3 Trends
5.4 Hydraulic oil lubrication
5.4.1 Characteristics
5.4.2 Applications
5.4.3 Trends
5.5 Fire resistant hydraulic fluid
5.5.1 Characteristics
5.5.2 Applications:
5.5.3 Trends
5.6 Nuclear resistant lubricant
5.6.1 Characteristics
5.6.2 Applications
5.6.3 Trends
5.7 Bearing oil lubrication
5.7.1 Characteristics
5.7.2 Applications
5.7.3 Trends
5.8 Heat transfer fluid
5.8.1 Characteristics
5.8.2 Applications
5.8.3 Trends
5.9 Re-refined base oils and lubricants
5.9.1 Characteristics
5.9.2 Applications
5.9.3 Trends
5.10 Nanomaterials based lubrication
5.10.1 Characteristics
5.10.2 Applications
5.10.3 Trends
5.11 Other emerging fields
5.11.1 Characteristics
5.11.2 Applications
5.11.3 Trends

Chapter 6 Lubricants Market – Regional Analysis
6.1 Global Lubricants Market: Geographic Overview
6.1.1 Global lubricants volume share, by geography, 2011 and 2018
6.2 North America
6.2.1 North America overall lubricants market volume and revenue, 2011 – 2018 (Kilo Tons) (USD Million)
6.2.2 North America lubricants market estimate and forecast, by product, 2011 – 2018 (Kilo Tons)
6.2.3 North America lubricants market estimate and forecast, by product, 2011 – 2018 (USD Million)
6.3 Europe
6.3.1 Europe overall lubricants market volume and revenue, 2011 – 2018 (Kilo Tons) (USD Million)
6.3.2 Europe lubricants market estimate and forecast, by product, 2011 – 2018 (Kilo Tons)
6.3.3 Europe lubricants market estimate and forecast, by product, 2011 – 2018 (USD Million)
6.4 Asia Pacific
6.4.1 Asia Pacific overall lubricants market volume and revenue, 2011 – 2018 (Kilo Tons) (USD Million)
6.4.2 Asia Pacific lubricants market estimate and forecast, by product, 2011 – 2018 (Kilo Tons)
6.4.3 Asia Pacific lubricants market estimate and forecast, by product, 2011 – 2018 (USD Million)
6.5 RoW
6.5.1 RoW overall lubricants market volume and revenue, 2011 – 2018 (Kilo Tons) (USD Million)
6.5.2 RoW lubricants market estimate and forecast, by product, 2011 – 2018 (Kilo Tons)
6.5.3 RoW lubricants market estimate and forecast, by product, 2011 – 2018 (USD Million)

Chapter 7 Company Profiles
7.1 Binol Biolubricants
7.1.1 Company overview
7.1.2 Product portfolio
7.1.3 Financial overview
7.1.4 SWOT analysis
7.1.5 Business strategy
7.1.6 Recent developments
7.2 British Petroleum Plc
7.2.1 Company overview
7.2.2 Product portfolio
7.2.3 Financial overview
7.2.4 SWOT analysis
7.2.5 Business strategy
7.2.6 Recent developments
7.3 Cargill Incorporated
7.3.1 Company overview
7.3.2 Product portfolio
7.3.3 Financial overview
7.3.4 SWOT analysis
7.3.5 Business strategies
7.3.6 Recent developments
7.4 Chevron
7.4.1 Company overview
7.4.2 Product portfolio
7.4.3 Financial overview
7.4.4 SWOT analysis
7.4.5 Business strategy
7.4.6 Recent developments
7.5 ConocoPhilips Company
7.5.1 Company Overview
7.5.2 Product portfolio
7.5.3 Financial overview
7.5.4 SWOT analysis
7.5.5 Business strategy
7.5.6 Recent developments
7.6 Exxon Mobil Corporation (XOM)
7.6.1 Company overview
7.6.2 Product portfolio
7.6.3 Financial overview
7.6.4 SWOT analysis
7.6.5 Business strategy
7.6.6 Recent developments
7.7 Fuchs Lubricants Co.
7.7.1 Company overview
7.7.2 Product portfolio
7.7.3 Financial overview
7.7.4 SWOT analysis
7.7.5 Business strategy
7.7.6 Recent developments
7.8 Hindustan Petroleum Corporation Limited
7.8.1 Company overview
7.8.2 Financial overview
7.8.3 Product portfolio
7.8.4 Business strategy
7.8.5 SWOT analysis
7.8.6 Recent developments
7.9 InterOil Corporation
7.9.1 Company overview
7.9.2 Financial overview
7.9.3 Business strategy
7.9.4 SWOT analysis
7.9.5 Recent developments
7.10 OAO Lukoil
7.10.1 Company overview
7.10.2 Financial overview
7.10.3 Product portfolio
7.10.4 Business strategy
7.10.5 SWOT analysis
7.10.6 Recent developments
7.11 Petrobras SA
7.11.1 Company overview
7.11.2 Product portfolio
7.11.3 Financial overview
7.11.4 SWOT analysis
7.11.5 Business strategy
7.11.6 Recent developments
7.12 Royal Dutch Shell plc
7.12.1 Company overview
7.12.2 Product portfolio
7.12.3 Financial overview
7.12.4 SWOT analysis
7.12.5 Business strategy
7.12.6 Recent developments
7.13 China Petroleum & Chemical Corporation (Sinopec)
7.13.1 Company overview
7.13.2 Product portfolio
7.13.3 Financial overview
7.13.4 SWOT analysis
7.13.5 Business strategy
7.13.6 Recent developments
7.14 The Lubrizol Corporation
7.14.1 Company overview
7.14.2 Product portfolio
7.14.3 Financial overview
7.14.4 Business strategy
7.14.5 SWOT analysis
7.14.6 Recent developments
7.15 Total S.A.
7.15.1 Company overview
7.15.2 Product portfolio
7.15.3 Financial overview
7.15.4 SWOT analysis
7.15.5 Business strategy
7.15.6 Recent developments

List of Tables


TABLE 1 Global Mineral Lubricants Market Snapshot, 2011 and 2018
TABLE 2 Drivers of global lubricants market: Impact Analysis
TABLE 3 Restraints for global lubricants market: Impact analysis
TABLE 4 Mineral, Synthetic and bio-based oil – Properties
TABLE 5 Crude Oil Price Trend, 2010 - 2018 (USD/BBL)
TABLE 6 Palm Oil Price Trend, 2010 - 2018 (USD/Ton)
TABLE 7 Castor Oil Price Trend, 2010 - 2018 (USD/Ton)
TABLE 8 Sunflower Oil Price Trend, 2010 - 2018 (USD/Ton)
TABLE 9 Turbine oil lubricant: Patents
TABLE 10 Compressor oil lubricant: Patents
TABLE 11 Gear oil lubricant: Patents
TABLE 12 Hydraulic oil lubricant: Patents
TABLE 13 Fire resistant hydraulic fluid: Patents
TABLE 14 Bearing oil lubricant: Patents
TABLE 15 Heat transfer fluid: Patents
TABLE 16 Re-refined base oils and lubricants: Patents
TABLE 17 Nanomaterials based lubricant: Patents
TABLE 18 Other Emerging lubricants: Patents
TABLE 19 North America lubricants market estimate and forecast, by product, 2011-2018 (Kilo Tons)
TABLE 20 North America lubricants market estimate and forecast, by product, 2011 -2018 (USD Million)
TABLE 21 Europe lubricants market estimate and forecast, by product, 2011-2018 (Kilo Tons)
TABLE 22 Europe lubricants market estimate and forecast, by product, 2011 -2018 (USD Million)
TABLE 23 Asia Pacific lubricants market estimate and forecast, by product, 2011-2018 (Kilo Tons)
TABLE 24 Asia Pacific lubricants market estimate and forecast, by product, 2011 -2018 (USD Million)
TABLE 25 RoW lubricants market estimate and forecast, by product, 2011-2018 (Kilo Tons)
TABLE 26 RoW lubricants market estimate and forecast, by product, 2011 -2018 (USD Million)

List of Figures


FIG. 1 Lubricants: Market segmentation
FIG. 2 Global lubricants market volume and revenue, 2011 – 2018 (Kilo Tons) (USD Million)
FIG. 3 Value chain analysis of synthetic and bio-based lubricants
FIG. 4 Global automobile sales demand, 2010 - 2018 (Million units)
FIG. 5 Mineral oil price trends, 2010 – 2013 (USD/ton) (global average)
FIG. 6 Mineral v/s bio-lubricants: Raw material price trends, 2010 - 2018
FIG. 7 Porter’s five forces analysis
FIG. 8 Market attractiveness analysis of bio-based lubricants by application, 2011
FIG. 9 Market attractiveness analysis of Group IV & V lubricants vs. mineral-oil based lubricants, 2011
FIG. 10 Mineral and synthetic lubricants: Company market share, 2011
FIG. 11 Bio-based lubricants: Company market share, 2011
FIG. 12 Global lubricants market volume share, by product, 2011 – 2018
FIG. 13 Global demand for mineral lubricants, 2011 - 2018 (Kilo Tons) (USD Million)
FIG. 14 Global mineral lubricants volume share, by application, 2011 – 2018
FIG. 15 Global demand for synthetic lubricants, 2011 – 2018 (Kilo Tons) (USD Million)
FIG. 16 Global synthetic lubricants market volume share, by application, 2011 – 2018
FIG. 17 Global demand for bio-based lubricants, 2011 – 2018 (Kilo Tons) (USD Million)
FIG. 18 Global bio-based lubricants market volume share, by application, 2011 – 2018
FIG. 19 Global lubricants volume share, by geography, 2011 and 2018
FIG. 20 North America overall lubricants market volume and revenue, 2011 – 2018 (Kilo Tons) (USD Million)
FIG. 21 Europe lubricants overall market volume and revenue, 2011 – 2018 (Kilo Tons) (USD Million)
FIG. 22 Asia Pacific overall lubricants market volume and revenue, 2011 – 2018 (Kilo Tons) (USD Million)
FIG. 23 RoW overall lubricants market volume and revenue, 2011 – 2018 (Kilo Tons) (USD Million)

Upcoming Reports:

Oil Filter And Fuel Filter Market - Global Industry Analysis, Market Size, Share, Trends, Analysis, Growth And Forecast 2014 - 2020
By - Transparency Market Research
The oil filter is basically designed to remove contaminants from lubricating oil, transmission oil, hydraulic oil and engine oil. They are used in various types of hydraulic machineries. On the other hand, fuel filters are designed to remove dirt and dust particles from the fuel. They are usually found in the internal combustion engines. The global oil filter and fuel filter market is expected to show a remarkable growth rate by coming years. One of the major factor contributing the growth of the global oil filter and fuel filter market are the increasing vehicle production and the lower...
Digital Oil Field Technology Market - Global Industry Analysis, Size, Share, Trends, Analysis, Growth And Forecast, 2013 - 2019
By - Transparency Market Research
Digital oil field technology is the use of automation, instrumentation and IT technologies together in order to improve our existing oil and gas industry technologies. This integration with the help of software makes the analysis much easier and faster. This technology helps in efficient data management, production process optimization, provide more realistic images of the reservoir. Instrumentation and automation includes communication and network processing technologies such as PLC, SCADA, safety system and smart well. Digital oil field technology market can be segmented on the base of...
Ethyl Ether Market - Global Industry Analysis, Size, Share, Growth, Trends And Forecast, 2013 - 2019
By - Transparency Market Research
Ethyl ether is also known as diethyl ether, is a highly flammable, volatile organic compound. It is synthesized from vapor phase dehydration of ethanol. It is used in fuels, anesthetic agents, laboratory solvents, recreation drugs and pharmaceutical applications. Its main application is in reaction and extraction medium of fragrances, chemicals and pharmaceuticals due to its inertness. Ethyl ether is claimed to excellent solvent for resins, waxes and gums. In automotive industry it has various applications such as it is used as an octane, oxygen enhancer in gasoline, lubricating oil,...

Research Assistance

We will be happy to help you find what you need.
Please call us or write us:

866-997-4948 (Us-Canada Toll Free)
Tel: +1-518-618-1030
Email: sales@researchmoz.us
Select License type:

Share this report

Related News

Technology License Deal Signed between Sumitomo Chemical and Universal Display
Jan 22, 2015  
A new OLED technology license agreement has been signed between Sumitomo Chemical Company Ltd., and Universal Display Corporation. This agreement states that non-exclusive license rights have been granted to Sumitomo Chemical by Universal Display. These rights come within the ambit of several patents that are controlled and owned by Universal Display for manufacturing and selling processed...
Utah: Ranks No. 2 in Toxic Chemical Emissions
Jan 22, 2015  
As per reports, it has been observed and concluded that Utah has the maximum number of open-pit copper mines in the entire world, and this involves huge volumes of lead compounds. The annual inventory of Environmental Protection Agency denotes that Utah holds the second position amidst 56 states and territories all over the country for toxic and harmful releases per square mile. ...
The Production of Bio-based Materials and Chemicals to Increase Significantly by 2018
Jan 22, 2015  
It is expected that the global production capacity of bio-based materials and chemicals will increase significantly by 2018. The growth will primarily be driven by growth taking place in Brazil, and the U.S. As a result, with the help of the emerging technologies the production will be greater than 7.4 million metric tons. Also, the market for bio-based materials and chemicals will be fueled...
Maxx Mobilink Announces its Plan to Manufacture in India
Jan 22, 2015  
Maxx Mobilink, Indian smartphone manufacturer intends to start making mobile handsets at its Haridwar plant. This plan will only materialize after the manufacturer has assembled devices starting April at its factory where it presently makes charger, batteries, and other such accessories. The mobile manufacturer’s plan is in accordance with Prime Minister’s appeal to the nation to...
Ontario to Benefit from Western Canadas Loss
Jan 22, 2015  
As oil prices are hitting a new low in Canada, the country cannot help but turn to Ontario to make some recovery. Presently, Ontario is Canada’s only hope to sustain its growth in manufacturing. It was in December last year that TD Economics predicted that Ontario will help Canada achieve growth at a rapid pace with a 2.6% hike in GDP in 2015. The current economic winds are suggestive of...