ResearchMoz

Research on Solid Waste Treatment Industry in China, 2013-2017

Huidian Research
Published Date » 2013-04-02
No. Of Pages » 86
 
   
 The total volume of city household waste harmless treatment has increased significantly from 80.51 million tons in 2005 to 130.9 million tons in 2011, increasing by 63% or so. Harmless treatment rate has increased from 52% in 2005 to 87% in 2010, increasing by 35% or so. After the year of 2020, China will gradually enter household waste classification management stage. 
 
   
 The investment in solid waste treatment accounts for a small proportion in China's investment in environmental protection, which results in the serious short in solid waste treatment facilities. "Twelfth Five-Year Plan" will be a turning point for solid waste treatment industry; the investment in the industry will rise, and the construction of the industry will enter fastigium during 2011-2015....
Table of Contents

1. Overview of Solid Waste Treatment Industry in China
1.1. Definition
1.2. Industry Periodic Analysis
1.2.1. Industry Development Cycle
1.2.2. Maturity of Segment Industry

2. Market Development Overview of Solid Waste Treatment Industry Overseas
2.1. Global Market of Solid Waste Treatment
2.2. Market Overview in Asia
2.3. Market Overview in Europe
2.4. Market Overview in Main Countries of America

3. Environment of Solid Waste Treatment Industry in China
3.1. Economic Development Environment in China
3.1.1. Economic Development Status
3.1.2. GDP
3.1.3. Fixed Asset Investment
3.1.4. Total Import and Export Amount and Growth Rate
3.2. Industry Related Policy and Standards

4. Market Status Quo of Solid Waste Treatment Industry in China
4.1. Industry Current Development
4.2. Development Status Quo and Characteristics of the Industry
4.3. Existing Problems and Countermeasures

5. Technology Development of Solid Waste Treatment Industry in China
5.1. Technology Status Quo
5.2. Technology Maturity Degree
5.3. Technology Gap between China and Foreign Countries and the Main Reasons
5.4. Strategy to Improve Technology

6. Development of Segment Market of Solid Waste Treatment Industry in China
6.1. Industrial Solid Waste Treatment Market in China
6.1.1. Industrial Solid Waste Treatment Market
6.1.2. Electronic Waste Treatment Market
6.1.3. Industrial Solid Recycling Market
6.2. Household Waste Treatment Market in China
6.2.1. Household Waste Treatment Market
6.2.2. Food Waste Treatment Market
6.2.3. Landfill Leachate Treatment Market
6.2.4. Garbage Power Market
6.3. Dangerous Solid Waste Treatment Market in China
6.3.1. Hazardous Solid Waste Treatment Market
6.3.2. Medical Solid Waste Treatment Market

7. Competitive Landscape of Solid Waste Treatment Industry in China
7.1 Industry Competitive Landscape
7.2 Industry Concentration Ratio
7.3 Competition Situation in the Future

8. Key Domestic Solid Waste Treatment Enterprises
8.1. Nanhai Development Co., Ltd.
8.1.1. Company Profile
8.1.2. Products and Advantage
8.1.3. Business Performance
8.1.4. Marketing Strategy
8.2. Shenzhen Green Eco-Manufacture High-Tech Co., Ltd.
8.2.1. Company Profile
8.2.2. Products and Advantage
8.2.3. Business Performance
8.2.4. Marketing Strategy
8.3. Sound Environmental Resources Co., Ltd.
8.3.1. Company Profile
8.3.2. Products and Advantage
8.3.3. Business Performance
8.3.4. Marketing Strategy
8.4. Tianjin Teda Environmental Protection
8.4.1. Company Profile
8.4.2. Products and Advantage
8.4.3. Business Performance
8.4.4. Marketing Strategy
8.5. Shanghai Chengtou Holding Co., Ltd.
8.5.1. Company Profile
8.5.2. Products and Advantage
8.5.3. Business Performance
8.5.4. Marketing Strategy

9. Investment Analysis and Advice on Solid Waste Treatment Industry
9.1. Investment Environment
9.2. Investment Opportunity
9.3. Investment Barrier
9.3.1. Industry Experience
9.3.2. Technical Capacity
9.3.3. Financial Strength
9.3.4. Administrative Licensing Qualification

10. Development Forecast of Solid Waste Treatment Industry in China
10.1. Development Trend in the Future
10.2. New Hot Spot Forecast of Solid Waste Treatment
10.2.1. Rural Solid Waste Treatment Space
10.2.2. Industrial Solid Waste Treatment Prospects
10.3. Development Trend of Solid Waste Treatment Related Products

List of Tables


List of Figures

Upcoming Reports:

Global Major Players and their market shares in Apron Feeders
By - QYResearch
Global Major Players and their market shares in Apron Feeders
Complex Regional Pain Syndrome (CRPS) Therapeutics Market - Global Industry Analysis, Size, Share, Growth, Trends And Forecast, 2014 - 2020
By - Transparency Market Research
Complex regional pain syndrome is a debilitating chronic pain condition causing intense pain particularly in the arms, hands, legs, or feet. This syndrome is characterized by pain, swelling, vasomotor instability, limited range of motion, skin color changes and patchy bone demineralization. CRPS is often regarded to be caused as a result of malfunction of failure of peripheral and central nervous system and therefore also sometimes referred as reflex sympathetic dystrophy syndrome. Complex regional pain syndrome (CRPS) is classified into two similar forms termed as CRPS type 1 (Reflex...
Poland: market of electric instantaneous water heaters
By - Williams and Marshal Strategy
This report presents a comprehensive overview of the electric instantaneous water heaters market in Poland and its state as of January 2014. It provides detailed analysis of the industry, its dynamics and structure. The purpose of the report is to describe the state of the electric instantaneous water heaters market in Poland, to present actual and retrospective information about the volumes and dynamics of production, imports, exports and consumption, the characteristics of the market for the period 2008-2012 and to build a forecast for the market development until 2018. In the same way,...

Research Assistance

We will be happy to help you find what you need.
Please call us or write us:

866-997-4948 (Us-Canada Toll Free)
Tel: +1-518-618-1030
Email: sales@researchmoz.us
Select License type:

Share this report

Related News

World Cup Stadium at Qatar to be Renovated for 2022 FIFA World Cup
Nov 26, 2014  
The design for renovation of the Khalifa International Stadium will soon be unveiled by the organization that is responsible for building the infrastructure and stadiums for the 2022 FIFA World Cup Qatar. The main construction work on the stadium is being looked into by two prominent construction companies. The joint venture is between Six Construct and Midmac Contracting. Six Construct is a...
DOD Spending Low, Corps Look for More Work in Alaska
Nov 24, 2014  
Military construction across Alaska continues to decline. Government contractors expect to keep busy for the time being with work delegated by other federal agencies. The United States Army Corps of Engineers expects to have more than US$410 million worth of work available on at least 400 projects in the 2015 fiscal year. Chris Tew, the Alaska Contracting Division chief said that is...
China Consumer Products Fair Kicks-Off in Abu Dhabi
Nov 24, 2014  
Seeking to market products in the United Arab Emirates (UAE) and Mena regions, more than 100 consumer goods makers from China showcased their mid-to-high-end consumer goods at the China Consumer Products Fair. The second edition of the China Consumer Products Fair 2014 began on Monday in Abu Dhabi’s National Exhibition Center (Adnec). The event was officially inaugurated by the Economic...
Ford Recalls 65,000 Fusion Models Due to Issues in Ignition Key
Nov 20, 2014  
If anything defines the world of automobiles currently, it would be recalls. It seems that a flood of automobiles has surrounded the global automobiles industry, which once represented a flourishing and highly profitable industry.  The current automobile giants ordering yet another recall is Ford Motors Co. Ford declared on Tuesday that it is recalling nearly 65,000 sedans from...
3D Printed Heart Model for Better Cardiological Treatment
Nov 20, 2014  
According to research carried out by the American Heart Association’s Scientific Sessions 2014, surgeons will be able to treat complex heart disorders in patients, with the help of a three dimensional experimental printed model of the heart. For surgical planning, most cardiac surgeons make use of two dimensional images of the heart taken by MRI, ultrasound, and X-ray. But the problem is...