ResearchMoz

MediPoint: Spinal Fusion - Current and Future Players

GlobalData
Published Date » 2014-06-20
No. Of Pages » 79
   
 Spinal fusion surgery is a well-established procedure that has been performed since the early 1900s. The procedure has benefited immensely from its long history of use, investments in advancing technologies, and its clinical success in a growing variety of spinal conditions. These traits have led spinal fusion surgery to become one of the most frequently performed surgeries in the US, which is undoubtedly, the largest geographic market for this procedure. Given the global phenomenon of an aging society and the associated increasing incidences of degenerative spinal conditions, the spinal fusion market is expected to remain strong over the forecast period. 
   
 The report identifies and analyzes the key companies shaping and driving the Spinal fusion market. The report provides...
Table of Content

1 Table of Contents 2
1.1 List of Tables 4
1.2 List of Figures 5

2 Introduction 6
2.1 Overview 6
2.2 Catalyst 6

3 Competitive Assessment 8
3.1 Indications 8
3.2 Classification Based on System 10
3.2.1 Spinal Plating Systems 10
3.2.2 Interbody Cages 11
3.2.3 Pedicle Screw Systems 12
3.3 Company Market Share 13
3.3.1 US 13
3.3.2 5EU 14
3.3.3 APAC 15
3.3.4 South America 16

4 Pipeline Assessment 18

5 Current and Future Players 21
5.1 Overview 21
5.2 Trends in Corporate Strategy 21
5.3 Company Profiles 21
5.3.1 Aesculap 21
5.3.2 Alphatec Spine 24
5.3.3 Amedica Corporation 27
5.3.4 Medtronic Spinal and Biologics 29
5.3.5 DePuy Spine 32
5.3.6 Globus Medical 35
5.3.7 K2M 38
5.3.8 Biomet 41
5.3.9 Stryker 44
5.3.10 Zimmer 47
5.3.11 Nuvasive 51
5.3.12 Orthofix 54
5.3.13 Integra LifeSciences 57

6 Appendix 61
6.1 Bibliography 61
6.2 Abbreviations 71
6.3 Report Methodology 72
6.3.1 Overview 72
6.3.2 Coverage 72
6.3.3 Primary Research 72
6.3.4 Secondary Research 73
6.3.5 Forecasting Methodology 74
6.4 Key Opinion Leaders Included in this Study 75
6.5 About the Authors 76
6.5.1 Joseph A. Gregory, Analyst, Surgical Devices 76
6.5.2 Derek Archila, MBA, Director of Research and Analysis, Medical Devices 76
6.6 Global Head of Healthcare 77
6.6.1 Bonnie Bain, Ph.D., Global Head of Healthcare 77
6.7 About MediPoint 78
6.8 About GlobalData 78
6.9 Disclaimer 78

List of Tables


Table 1: Indications for Lumbar Spinal Fusion 9
Table 2: Spinal Surgery, US Company Market Share, 2012 13
Table 3: Spinal Surgery, 5EU Company Market Share, 2012 14
Table 4: Spinal Surgery, APAC Company Market Share, 2012 15
Table 5: Spinal Surgery, South American Company Market Share, 2012 16
Table 6: Company Portfolio - Aesculap 22
Table 7: Product Portfolio - Aesculap 23
Table 8: Company Portfolio - Alphatec Spine 25
Table 9: Product Portfolio - Alphatec Spine 26
Table 10: Company Portfolio - Amedica 28
Table 11: Product Portfolio - Amedica 29
Table 12: Company Portfolio - Medtronic Spinal and Biologics 30
Table 13: Product Portfolio - Medtronic Spinal and Biologics 31
Table 14: Company Portfolio - DePuy Spine 33
Table 15: Product Portfolio - DePuy Spine 34
Table 16: Company Portfolio - Globus Medical 36
Table 17: Product Portfolio - Globus Medical 37
Table 18: Company Portfolio - K2M 39
Table 19: Product Portfolio - K2M 40
Table 20: Company Portfolio - Biomet 42
Table 21: Product Portfolio - Biomet 43
Table 22: Company Portfolio - Stryker 45
Table 23: Product Portfolio - Stryker 46
Table 24: Company Portfolio - Zimmer 49
Table 25: Product Portfolio - Zimmer 50
Table 26: Company Portfolio - Nuvasive 52
Table 27: Product Portfolio - Nuvasive 53
Table 28: Company Portfolio - Orthofix 55
Table 29: Product Portfolio - Orthofix 56
Table 30: Company Portfolio - Integra LifeSciences 58
Table 31: Product Portfolio - Integra LifeSciences 59

List of Figures


Figure 1: Spinal Surgery, US Company Market Share, 2012 14
Figure 2: Spinal Surgery, 5EU Company Market Share, 2012 15
Figure 3: Spinal Surgery, APAC Company Market Share, 2012 16
Figure 4: Spinal Surgery, South American Company Market Share, 2012 17

Upcoming Reports:

Cast Removal Devices Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2013 - 2019
By - Transparency Market Research
The cast removal devices are instruments used for cutting casting material such as orthopedic plaster. These devices possess properties such as high cutting torque and low material speed. The devices are further classified in three categories in accordance to their method of application for cutting such as hand handled device, advanced device and bottom edge device. The hand handled devices cut the orthopedic casts without noise with a few or no debris generation however advanced devices maintain the velocity of the equipment throughout the cast. The bottom edge devices are designed to cut...
Electrosurgical Devices Market - Global Industry Size, Market Share, Trends, Analysis, And Forecasts 2012 - 2018
By - Transparency Market Research
Global electrosurgical devices market is forecasted to grow at an annual growth rate of 5% and reach a market value of USD 1,412.8 million in 2018. This growth is mainly driven by the increasing demand for minimally invasive procedures and technological innovations that are making surgeries safer and least destructive for surrounding tissues. Advancement in technology is helping reduce problems such as collateral damage to tissues, and eschar enhancing the performance of electrosurgery devices. This is   leading to greater adoption of these devices in healthcare industry....
Wire and Cable Materials and Technologies Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2012 - 2018
By - Transparency Market Research
Wires and cables are used for transmitting power, signals, and payloads in various industries. They are widely used across various end-use segments including residential, commercial, and industrial purposes. The growth of global wires and cables market is primarily driven by the growth of the IT and communication industry where wires and cables play a vital role in transmitting power.  The growing demand for wire and cables across various end-use industries such as IT and telecommunication is one of the major factors driving the market for wire and cables....

Research Assistance

We will be happy to help you find what you need.
Please call us or write us:

866-997-4948 (Us-Canada Toll Free)
Tel: +1-518-618-1030
Email: sales@researchmoz.us
Select License type:

Share this report

Related News

Pepsi Limon, A Brand New Addition to the Pepsi Portfolio
May 22, 2015  
To add a new dose of excitement to its cola offering, Pepsi has come up with the all new Pepsi Limon. This is a new flavored cola, which according to the company is manufactured with just the appropriate amount of real lime juice. The idea for the drink was inspired from the escalating preference of the Hispanic consumers. To satisfy the taste urges of the consumers, the new Pepsi Limon will...
India’s Auto Exports Register Record High Figures in 2014-15
May 21, 2015  
In the fiscal year 2014-15, Indian factories exported a record number of 3.5 million vehicles, which is 15% higher than what they managed a year back. However, domestic sales rose by only 5% since last financial year, with 2.6 million units being sold.  Exports of utility vehicles, commercial vehicles, cars and two- wheelers have increased every year since 2000. But domestic car...
Turkey’s Labor Dispute Affects Ford’s Production
May 21, 2015  
With the ongoing labor dispute in Turkey, Ford’s Turkish manufacturing facility has been hit. Ford Otosan, a joint venture between the company and Turkey’s Koc Holding, mentioned that due to supply problems, production has been temporary stalled at its plants located at Yenikoy and Golcuk in northwestern part of the country. Earlier this week, production at Tofas and Oyak Renault,...
International Automakers Slashing Prices in China
May 21, 2015  
With a slowing Chinese economy, the international automakers are cutting prices of vehicles to be sold in the nation. This has hit the profit margins of the automakers who are struggling with a slowdown in demand.  Last week saw Ford Motor Co. and General Motors slashing their prices on Chinese models. It closely follows rival Volkswagen AG’s move last month to offer...
Century Old Vancouver Sheet Metal Enterprise Shutters
May 21, 2015  
A Vancouver based metal works business in operation for almost 100 years, known for custom metal works shuttered this week.  The business known as Main Sheet Metal Works, a fabrication shop for sheet-metal on Main Street which is wedged between Pacific Central Station and Chinatown has existed for more than ninety years.  As commented by a third generation member of...