ResearchMoz

Global Geographical Information Systems Market 2012-2016

Technavio
Published Date » 2013-04-29
No. Of Pages » 78
     
  Introduction to the Market  
 A geospatial information system or geographical information system (GIS) is a set of tools that interprets geographical or geospatial data or information. These systems digitize the received geospatial data, process (store, interpret, analyze, and manipulate) the data, and provide the required output.  
     
  Market Overview  
 The Global GIS market is driven by traditional GIS, one of the largest segments in this market. It also generates a large portion of its revenue from hardware and software products. The Global GIS market is expected to post a CAGR of 9.60 percent during 2012-2016. The Global GIS market is driven by many growth factors; one is the increasing demand of GIS from Government sectors. However, the increased number of...
Table of Content

1. Executive Summary

2. List of Abbreviations

3. Introduction

4. Market Research Methodology
Market Research Process
Research Design
Research Methodology

5. Scope of the Report
Market Overview

6. Market Landscape
6.1 GIS Segments
6.2 Market Size and Forecast
6.3 Large GIS Application Segmentation
6.4 Global Traditional GIS Market

7. Product Segmentation
7.1 Software Segment
Market Size and Forecast
7.2 Hardware Segment
Market Size and Forecast
7.3 Services Segment
Market Size and Forecast
7.4 Data Segment
Market Size and Forecast

8. End-user Segmentation
8.1 GIS Market in Government Sector
Market Size and Forecast
Product Segmentation
8.2 GIS Market in Utility Industry
Market Size and Forecast
Product Segmentation
8.3 GIS Market in Natural Resource Industry
Market Size and Forecast
Product Segmentation
8.4 GIS Market in Communication Industry
Market Size and Forecast
Product Segmentation
8.5 Five Forces Analysis

9. Geographical Segmentation
9.1 GIS Market in North America
Market Size and Forecast
Key Leading Countries in North America
9.2 GIS Market in Europe
Market Size and Forecast
Key Leading Countries in Europe
9.3 GIS Market in the APAC Region
Market Size and Forecast
Key Leading Countries in the APAC Region
9.4 GIS Market in South America
Market Size and Forecast
Key Leading Countries in South America
9.5 GIS Market in Africa
Market Size and Forecast
Key Leading Countries in Africa
9.6 GIS Market in the Middle East
Market Size and Forecast
Key Leading Countries in the Middle East

10. Key Leading Countries
10.1 The US
GIS Market in the US by End-user Segmentation
10.2 Canada
GIS Market in Canada by End-user Segmentation
10.3 China
GIS Market in China by End-user Segmentation
10.4 The UK
GIS Market in the UK by End-user Segmentation
10.5 France
GIS Market in France by End-user Segmentation

11. Vendor Landscape

12. Buying Criteria

13. Market Growth Drivers

14. Drivers and their Impact

15. Market Challenges

16. Impact of Drivers and Challenges

17. Market Trends

18. Key Vendor Analysis
18.1 Esri Inc.
Business Overview
Key Information
SWOT Analysis
18.2 Hexagon AB
Business Overview
Key Information
SWOT Analysis
18.3 MacDonald, Dettwiler and Associates Ltd.
Business Overview
Key Information
SWOT Analysis
18.4 Pitney Bowes Inc.
Business Overview
Key Information
SWOT Analysis

19. Other Reports in this Series

List of Tables


List of Figures


Exhibit 1: Market Research Methodology
Exhibit 2: GIS by Market Segmentation
Exhibit 3: Global GIS Market 2012-2016 (US$ million)
Exhibit 4: Large GIS and Traditional GIS 2012-2016
Exhibit 5: Global Traditional GIS Market 2012-2016 (US$ million)
Exhibit 6: Global GIS Market by Product Segmentation 2012
Exhibit 7: Global GIS Market by Software Segment 2012-2016 (US$ million)
Exhibit 8: Global GIS Market by Hardware Segment 2012-2016 (US$ million)
Exhibit 9: Global GIS Market by Services Segment 2012-2016 (US$ million)
Exhibit 10: Global GIS Market by Data Segment 2012-2016 (US$ million)
Exhibit 11: Global GIS Market by End-user Segmentation 2012-2016
Exhibit 12: Global GIS Market in Government Sector 2012-2016 (US$ million)
Exhibit 13: Global GIS Market in Government Sector by Product Segmentation 2012
Exhibit 14: Global GIS Market in Utility Industry 2012-2016 (US$ million)
Exhibit 15: Global GIS Market in Utility Industry by Product Segmentation 2012
Exhibit 16: Global GIS Market in Natural Resource Industry 2012-2016 (US$ million)
Exhibit 17: Global GIS Market in Utility Industry by Product Segmentation 2012
Exhibit 18: Global GIS Market in Communication Industry 2012-2016 (US$ million)
Exhibit 19: Global GIS Market in Communication Industry by Product Segmentation 2012
Exhibit 20: Global GIS Market by Geographical Segmentation 2012-2016
Exhibit 21: GIS Market in North America 2012-2016 (US$ million)
Exhibit 22: Key Leading Countries in GIS Market in North America 2012
Exhibit 23: GIS Market in Europe 2012-2016 (US$ million)
Exhibit 24: Key Leading Countries in GIS Market in Europe 2012
Exhibit 25: GIS Market in the APAC Region 2012-2016 (US$ million)
Exhibit 26: Key Leading Countries in GIS Market in the APAC Region 2012
Exhibit 27: GIS Market in South America 2012-2016 (US$ million)
Exhibit 28: Key Leading Countries in GIS Market in South America 2012
Exhibit 29: GIS Market in Africa 2012-2016 (US$ million)
Exhibit 30: Key Leading Countries in GIS Market in Africa 2012
Exhibit 31: GIS Market in the Middle East 2012-2016 (US$ million)
Exhibit 32: Key Leading Countries in GIS Market in the Middle East 2012
Exhibit 33: GIS Market in the US by End-user Segmentation 2012
Exhibit 34: GIS Market in Canada by End-user Segmentation 2012
Exhibit 35: GIS Market in China by End-user Segmentation 2012
Exhibit 36: GIS Market in the UK by End-user Segmentation 2012
Exhibit 37: GIS Market in France by End-user Segmentation 2012
Exhibit 38: Global GIS Market by Vendor Segmentation 2012

Upcoming Reports:

High-Performance Anticorrosion Coatings Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2014 - 2020
By - Transparency Market Research
Anti-corrosion refers to the protection of metals surfaces from corroding in highly corrosive environments. Metallic materials react with the air or water surfaces once they are put to corrosive environments. The corrosive effect is clearly visible on the metal surfaces. Hence, any metal material that lack preventive measures may rust from outside as well as inside based on the surrounding atmospheric conditions. A number of methods are been used to reduce the risk of corrosion, primarily in marine applications. Anti-corrosion is one of the measures used particularly in the areas of...
Oil Sands Market - Global Industry Analysis, Size, Share, Trends, Analysis, Growth And Forecast, 2013 - 2019
By - Transparency Market Research
Oil sands, technically termed as bituminous sands come under a form of petroleum deposit. They are loose or consolidated sandstone having naturally occurring mixture of sand, water and clay which is saturated with viscous and extremely dense form of petroleum called bitumen. Due to higher oil prices the oil sands and heavy oil market has seen a growth.  Some of the key factors driving the growth of this market are employment growth rate, demand for oil and increasing oil production globally. The extraction of oil sands and obtaining crude oil requires refining; this process is...
Poland: wood veneers market
By - Williams and Marshal Strategy
This report presents a comprehensive overview of the wood veneers market in Poland and its state as of January 2014. It provides detailed analysis of the industry, its dynamics and structure. The purpose of the report is to describe the state of the wood veneers market in Poland, to present actual and retrospective information about the volumes and dynamics of production, imports, exports and consumption, the characteristics of the market for the period 2008-2012 and to build a forecast for the market development until 2018. In the same way, the report presents an elaborate overview of the...

Research Assistance

We will be happy to help you find what you need.
Please call us or write us:

866-997-4948 (Us-Canada Toll Free)
Tel: +1-518-618-1030
Email: sales@researchmoz.us
Select License type:

Share this report

Related News

World Cup Stadium at Qatar to be Renovated for 2022 FIFA World Cup
Nov 26, 2014  
The design for renovation of the Khalifa International Stadium will soon be unveiled by the organization that is responsible for building the infrastructure and stadiums for the 2022 FIFA World Cup Qatar. The main construction work on the stadium is being looked into by two prominent construction companies. The joint venture is between Six Construct and Midmac Contracting. Six Construct is a...
DOD Spending Low, Corps Look for More Work in Alaska
Nov 24, 2014  
Military construction across Alaska continues to decline. Government contractors expect to keep busy for the time being with work delegated by other federal agencies. The United States Army Corps of Engineers expects to have more than US$410 million worth of work available on at least 400 projects in the 2015 fiscal year. Chris Tew, the Alaska Contracting Division chief said that is...
China Consumer Products Fair Kicks-Off in Abu Dhabi
Nov 24, 2014  
Seeking to market products in the United Arab Emirates (UAE) and Mena regions, more than 100 consumer goods makers from China showcased their mid-to-high-end consumer goods at the China Consumer Products Fair. The second edition of the China Consumer Products Fair 2014 began on Monday in Abu Dhabi’s National Exhibition Center (Adnec). The event was officially inaugurated by the Economic...
Ford Recalls 65,000 Fusion Models Due to Issues in Ignition Key
Nov 20, 2014  
If anything defines the world of automobiles currently, it would be recalls. It seems that a flood of automobiles has surrounded the global automobiles industry, which once represented a flourishing and highly profitable industry.  The current automobile giants ordering yet another recall is Ford Motors Co. Ford declared on Tuesday that it is recalling nearly 65,000 sedans from...
3D Printed Heart Model for Better Cardiological Treatment
Nov 20, 2014  
According to research carried out by the American Heart Association’s Scientific Sessions 2014, surgeons will be able to treat complex heart disorders in patients, with the help of a three dimensional experimental printed model of the heart. For surgical planning, most cardiac surgeons make use of two dimensional images of the heart taken by MRI, ultrasound, and X-ray. But the problem is...