ResearchMoz

Global and China Automotive Wheel Industry Report, 2012 - 2013

Research In China
Published Date » 2013-04-22
No. Of Pages » 138

The report highlights the followings:

  1. Global Automotive Market 
  2. China Automotive Market 
  3. Global Automotive Wheel Market and Industry 
  4. China Automotive Wheel Market and Industry
  5. 32 Aluminum Wheel Makers and 5 Steel Wheel Makers
In 2012, the world’s PLT output hit 67.6 million, with the popularity rate of aluminum wheel as high as 66%. The estimate suggests that the world’s PLT output in 2013 will register 68.9 million with the penetration rate of aluminum wheel soaring to 67%. In 2012, OEM aluminum wheel shipment approximated 185 million, and the shipment of AM aluminum wheel reached 21 million pcs. In 2012, the world’s aluminum wheel market scale approached around USD12.9 billion, while the targeted figure in 2013 will increase to USD13.7 billion. 

At the end of 2012, China’s aluminum wheel capacity approached 180 million pcs, while the sales volume surpassed 120 million pcs, with the capacity utilization above 70%. In particular, some 45 million pcs were sold in domestic market, while the rest 75 million ones were exported to overseas markets. 

In 2011-2012, the Chinese market witnessed severe overcapacity of both alumina and electrolytic aluminum, leading to a nosedive of alumina price. In order to dissolve capacities, a great many of alumina enterprises tapped into the aluminum wheel market successively, causing oversupply and cut-throat competition in the market. Consequently, the profits of SMEs fell sharply. By contrast, large industrial players expand market further relying on their scale advantage and improve qualities of top-grade products. A case in point was CITIC Dicastal Wheel Manufacturing, the wheel output of which hit 27 million pcs in 2012, with the revenue substantially rising by 27.8% from the preceding year, despite the slight output growth of 12.5% against the 24 million ones over 2011. 

Due to the staggering economic recovery in Europe, industrial players in these countries saw steep dive in profit and slight drop in revenue. As for Japanese and North American counterparts, their profits were basically flat or on a slight decline. 
Table of Content

1. Global Automotive Market 
1.1 Global Automotive Industry
1.3 Global Automotive Market 

2. China Automotive Market 
2.1 Market Overview 
2.2 Passenger Car Market 
2.3 Commercial Vehicle Market
2.4 Automotive Market Pattern 

3. Global and China Wheel Market 
3.1 Global Aluminum Wheel Market 
3.2 Regional Pattern of Aluminium Wheel 
3.3 Supply Relationshhip between Aluminum Wheel Makers and Automotive Assembly Companies
3.4 China Automotive Wheel Export 
3.5 China Aluminum Wheel Industry 
3.6 China Steel Wheel Industry 
3.7 Ranking of World’s Wheel Companies by Revenue 

4. Aluminum Wheel Companies 
4.1CITIC Dicastal Wheel Manufacturing
4.1.1 Dicastal Xinglong 
4.1.2 Binzhou Mengwei Dicastal Wheel
4.1.3 Chongqing Dicastal Jieli
4.2 Lizhong Wheel 
4.3 Zhejiang Jinfei Machinery Group
4.4 SMX Dicastal Wheel Manufacturing 
4.5 Liuhe Group
4.5.1 Liufeng Machinery Industry Co., Ltd.
4.5.2 Liuhe Light Alloy (Kunshan) Co., Ltd.
4.5.3 Hunan Changfeng Liuhe Aluminum/Magnesium Products
4.6 Sheng Wang Auto Parts
4.7 Wanfeng Auto Wheels
4.8 Darewheel 
4.9 Fuhai Group
4.10 Shanghai Jinheli
4.11 Dongling(Holding) Co.,Ltd
4.12 Alcoa
4.13 Hayes Lemmerz (Iochpe-Maxion)
4.14 ENKEI
4.15 Chuo Seiki
4.16 Asahi Tec
4.17 Accuride
4.18 Surperior Industries International
4.19 Borbet
4.20 Uniwheel
4.21 Ronal
4.22 YHI
4.23 Topy
4.24 KWC
4.25 Donghe Casting 
4.26 Taishan Int'l Traffic Equipment Fittings
4.27 Shanghai Mingqi Aluminum Industry 
4.28 Lianyungang Qichuang Aluminum Products
4.29 Yueling
4.30 Guangsheng Aluminum Industry
4.31 SuperAlloy Industrial Co., Ltd.
4.32 Ningbo Baodi Autoparts 

5. Automotive Steel Wheel Companies  
5.1 Dongfeng Automotive Wheel
5.2 Zhengxing Wheel
5.3 Changchun Faway Automobile Components
5.4 Xingmin Wheel
5.5 Zhejiang Jingu Co., Ltd

List of Tables


List of Figures

Upcoming Reports:

Medical Gas Market - Global Industry Size, Market Share, Trends, Analysis, and Forecasts, 2012 - 2018
By - Transparency Market Research
Medical gases and pharmaceutical gases are specialized gases used for medical purposes, drug processing and various applications of biotechnology. Medical gases include pure gases and mixture of gases for various medical processes. The major types of gases included in the pharmaceutical and medical gases segment are hydrogen, oxygen, ammonia, boron hydride, nitrous oxide, nitrogen, and carbon dioxide. Technological innovation in the use of medical gases and an increase in demand for better healthcare facilities in developing economies are the major factors which are...
Plastic Dielectric Films Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2013 - 2019
By - Transparency Market Research
Plastic dielectric films are mainly used in capacitors, where the capacitor usually consists of two oppositely charged metal plates separated by an insulating material such as the plastic film which acts as a dielectric. Capacitors are mainly used in manufacturing electronic circuits. On a small scale, plastic dielectric films are used for power electronic converters and inverters. The major types of plastic dielectric films include polypropylene (PP), polyethylene terephthalate (PET), polyphenylene sulfide (PPS), polyethylene naphthalate (PEN), polytetrafluoroethylene (Teflon) (PTFE) and...
Antipsychotic Drugs Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast, 2012 - 2018
By - Transparency Market Research
Antipsychotics are drugs used in the treatment of brain disorders such as schizophrenia, bipolar disorder, and severe depression. According to the New York Times, antipsychotics are one of the largest types of prescribed drugs in the United States with over 3.1 million Americans accounting for a market worth USD 18 billion in 2011 itself. Global estimates suggest that over 1.25% of the global population suffers from psychosis and related disorders. This brings a market of about 7.5 million people suffering from combined disorders of schizophrenia, bipolar disorder, dementia,...

Research Assistance

We will be happy to help you find what you need.
Please call us or write us:

866-997-4948 (Us-Canada Toll Free)
Tel: +1-518-618-1030
Email: sales@researchmoz.us
Select License type:

Share this report

Related News

India is Facing a Cancer Crisis
Apr 15, 2014  
India is currently facing a cancer crisis – reports a recent research carried out at the King’s college London, in collaboration with the Tata Memorial Cancer Centre, Mumbai.  The reasons estimated for this crisis comprise of increasing rates of smoking, unequal access to proper treatment and belated diagnosis.  Every year, India witnesses around one...
Microparticle Tags to Check Counterfeit Goods Invented
Apr 14, 2014  
Researchers from the Massachusetts Institute of Technology have invented a new set of microparticles that can easily be read by smartphones and establish the authenticity of currency, electronic items and luxury goods.  This strategy is among those countless measures taken by big brands and companies to label their legitimate products in order to stop illegal copies of the...
USFDA Approves Lupins Generic Diabetic Drug
Apr 10, 2014  
The United States Food and Drugs Administration (USFDA) has finally approved Lupin Pharmaceuticals Inc (LPI), the American subsidiary of Indian drug manufacturers Lupin Ltd, to sell Pioglitazone Tablets in the U.S market. The approval has been granted first for fiscal 2015.  Pioglitazone is a generic medicine used for managing diabetes and is a version of Actos tablets...
Infrared Sensors can Soon Be Used to Develop Night-Vision Lenses - A New Discovery Confirms
Apr 8, 2014  
People who fear the dark may soon have a reason to rejoice – an infrared sensor that can eventually be used for mechanizing night-vision lenses has been developed. This effectively means that one can also see through dark with the help of these lenses.  This technology seems possible all due to graphene, a layer of tightly packed carbon atoms that has allowed the creation of...
Ontarios thanks Sustainable Development Technology Canada for Clean Tech Ecosystem Movements
Apr 8, 2014  
Sustainable Development Technology Canada has leveraged an extra $2.2 billion in funding from project partners that also includes global clean technology companies.  Sustainable Development Technology Canada (SDTC) is energizing and evolving the development and demonstration of a clean technology ecosystem. They are the vital contributors to the prominent concentration of clean...