ResearchMoz

Global 3D Scanning Market 2014-2018

Technavio
Published Date » 2013-11-15
No. Of Pages » 66
   
 TechNavio's analysts forecast the Global 3D Scanning market to grow at a CAGR of 13.81 percent over the period 2013-2018. One of the key factors contributing to this market growth is the increasing demand for 3D laser scanning. The Global 3D Scanning market has also been witnessing the increasing number of market consolidations. However, the high cost of implementation could pose a challenge to the growth of this market. 
   
 TechNavio's report, the Global 3D Scanning Market 2014-2018, has been prepared based on an in-depth market analysis with inputs from industry experts. The report covers North America, Latin America, and the EMEA and APAC regions; it also covers the Global 3D Scanning market landscape and its growth prospects in the coming years. The report also includes a...
TABLE OF CONTENT

1. Executive Summary

2. List of Abbreviations

3. Scope of the Report
3.1 Market Overview
3.2 Product Offerings

4. Market Research Methodology
4.1 Market Research Process
4.2 Research Methodology

5. Introduction

6. Market Landscape
6.1 Market Overview
6.2 Market Size and Forecast
6.3 Five Forces Analysis

7. Market Segmentation by Application

8. Market Segmentation by Technology

9. Geographical Segmentation
9.1 Global 3D Scanning Market by Geographical Segmentation 2012-2016
9.2 3D Scanning Market in North America
9.2.1 Market Size and Forecast
9.3 3D Scanning Market in Latin America
9.3.1 Market Size and Forecast
9.4 3D Scanning Market in the EMEA Region
9.4.1 Market Size and Forecast
9.5 3D Scanning Market in the APAC Region
9.5.1 Market Size and Forecast

10. Key Leading Countries
10.1 US
10.2 Germany
10.3 Japan

11. Buying Criteria

12. Market Growth Drivers

13. Drivers and their Impact

14. Market Challenges

15. Impact of Drivers and Challenges

16. Market Trends

17. Trends and their Impact

18. Vendor Landscape
18.1 Competitive Scenario
18.2 Market Share Analysis 2012
18.3 Other Prominent Vendors

19. Key Vendor Analysis
19.1 Creaform Inc.
19.1.1 Business Overview
19.1.2 Business Segmentation
19.1.3 Key Information
19.1.4 SWOT Analysis
19.2 Faro Technologies Inc.
19.2.1 Business Overview
19.2.2 Business Segmentation
19.2.3 Revenue Segmentation by Geography
19.2.4 Key Information
19.2.5 SWOT Analysis
19.3 Konica Minolta Inc.
19.3.1 Business Overview
19.3.2 Business Segmentation
19.3.3 Revenue Segmentation by Business
19.3.4 Revenue Segmentation by Geography
19.3.5 Key Information
19.3.6 SWOT Analysis
19.4 Surphaser
19.4.1 Business Overview
19.4.2 Business Segmentation
19.4.3 Key Information
19.4.4 SWOT Analysis

20. Other Reports in this Series

List of Tables

NA

List of Figures


Exhibit 1: Exhibit 1: Market Research Methodology
Exhibit 2: Global 3D Scanning market by Types of Scanners
Exhibit 3: Global 3D Scanning Market 2013-2018 (US$ million)
Exhibit 4: Global 3D Scanning Market by Applications
Exhibit 5: Global 3D Scanning Market by Technology
Exhibit 6: Global 3D Scanning Market by Geographical Segmentation 2013
Exhibit 7: 3D Scanning Market in North America 2013-2018 (US$ million)
Exhibit 8: 3D Scanning Market in Latin America 2013-2018 (US$ million)
Exhibit 9: 3D Scanning Market in EMEA Region 2013-2018 (US$ million)
Exhibit 10: 3D Scanning Market in APAC 2013-2018(US$ million)
Exhibit 11: Global 3D Scanning Market by Vendor Segmentation 2013
Exhibit 12: Business Segmentation of Creaform Inc.
Exhibit 13: Business Segmentation of Faro Technologies Inc.
Exhibit 14: Revenue Segmentation by Geography
Exhibit 15: Business Segmentation of Konica Minolta Inc.
Exhibit 16: Revenue segmentation by Operations 2012
Exhibit 17: Revenue Segmentation by Geography 2012
Exhibit 18: Business Segmentation of Surphaser

Upcoming Reports:

Digestive Health Enzymes Market - Global Industry Size, Market Share, Trends, Analysis And Forecasts 2012 - 2018
By - Transparency Market Research
Digestive health enzymes market is witnessing upsurge demand in developed economies due to growing health concerns and rising standard of living. This market is set to witness double digit growth rate during the forecasted period. Demand for digestive health enzymes is also expected to grow in developing economies as people are becoming aware about the benefits of these enzymes and spending more on personal health.  Improper eating habits are adding to the problem of digestive system, thus, creating the need of digestive enzymes for proper and healthy digestion. Digestive...
Proppants Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2012 - 2018
By - Transparency Market Research
Hydraulic fracturing is the process of generating fractures in a rock solid surface using pressurized fracture fluids, and proppants keep this fracture open while drilling for oil. This process is crucial in the extraction of liquids and gas, which cannot be easily extracted through normal drilling methods. The extraction is usually conducted in low permeable reservoirs of oil and natural gas. A proppant is one of the integral fluids after water that helps in the process of fracturing and makes it easier to extract oil and natural gas from permeable reservoirs. The market is...
Light Detection And Ranging (LiDAR) Market - Global Industry Analysis, Market Size, Share, Trends, Analysis, Growth And Forecast, 2013 - 2019
By - Transparency Market Research
The term LiDAR stands for Light Detection and Ranging which has been derived from term RADAR (Radio Detection and Ranging). LiDAR is used to examine or study the surface of the Earth with the help of remote sensing method. Remote sensing is the science of attaining information about areas or objects from a distance, mainly from the satellites or aircraft. LiDAR uses light in the form of pulsed laser to measure the distances. These light pulses are combined with the data recorded by the airborne system to generate accurate 3D information about the surface and shape of the Earth. ...

Research Assistance

We will be happy to help you find what you need.
Please call us or write us:

866-997-4948 (Us-Canada Toll Free)
Tel: +1-518-618-1030
Email: sales@researchmoz.us
Select License type:

Share this report

Related News

World Cup Stadium at Qatar to be Renovated for 2022 FIFA World Cup
Nov 26, 2014  
The design for renovation of the Khalifa International Stadium will soon be unveiled by the organization that is responsible for building the infrastructure and stadiums for the 2022 FIFA World Cup Qatar. The main construction work on the stadium is being looked into by two prominent construction companies. The joint venture is between Six Construct and Midmac Contracting. Six Construct is a...
DOD Spending Low, Corps Look for More Work in Alaska
Nov 24, 2014  
Military construction across Alaska continues to decline. Government contractors expect to keep busy for the time being with work delegated by other federal agencies. The United States Army Corps of Engineers expects to have more than US$410 million worth of work available on at least 400 projects in the 2015 fiscal year. Chris Tew, the Alaska Contracting Division chief said that is...
China Consumer Products Fair Kicks-Off in Abu Dhabi
Nov 24, 2014  
Seeking to market products in the United Arab Emirates (UAE) and Mena regions, more than 100 consumer goods makers from China showcased their mid-to-high-end consumer goods at the China Consumer Products Fair. The second edition of the China Consumer Products Fair 2014 began on Monday in Abu Dhabi’s National Exhibition Center (Adnec). The event was officially inaugurated by the Economic...
Ford Recalls 65,000 Fusion Models Due to Issues in Ignition Key
Nov 20, 2014  
If anything defines the world of automobiles currently, it would be recalls. It seems that a flood of automobiles has surrounded the global automobiles industry, which once represented a flourishing and highly profitable industry.  The current automobile giants ordering yet another recall is Ford Motors Co. Ford declared on Tuesday that it is recalling nearly 65,000 sedans from...
3D Printed Heart Model for Better Cardiological Treatment
Nov 20, 2014  
According to research carried out by the American Heart Association’s Scientific Sessions 2014, surgeons will be able to treat complex heart disorders in patients, with the help of a three dimensional experimental printed model of the heart. For surgical planning, most cardiac surgeons make use of two dimensional images of the heart taken by MRI, ultrasound, and X-ray. But the problem is...