ResearchMoz

China Waste Heat Utilization Equipment Industry Report, 2013-2015

Research In China
Published Date » 2013-09-23
No. Of Pages » 97
   
 China has rich waste heat resources. Especially in steel, nonferrous, chemical, cement, building materials, oil & petrochemical, light industry, coal and other sectors, waste heat resources approximately occupy 17%-67% of the total fuel consumption, of which, recyclable waste heat resource roughly stand up 60% of the total waste heat resources. At present, China’s waste heat utilization ratio is rather low, with the figure in large steel enterprises being 30%-50%. But the waste heat utilization in other sectors is even lower. Thus, China is expected to see a huge potential to improve its waste heat utilization.    
   
 By temperture of waste heat, the waste heat utilization equpments fall into two categories: the first comes to waste heat bolier which uses...
TABLE OF CONTENT

1. Brief Introduction to Waste Heat Utilization Industry
1.1 Sources and Application of Waste Heat Resources 
1.1.1 Sources of Waste Heat Resources and Distribution 
1.1.2 Application of Waste Heat Resources 
1.2 Definition and Classification of Waste Heat Utilization Equipment 
1.3 Assessment on Economic Benefit of Waste Heat Utilization Equipment

2. Operating Environment of Waste Heat Utilization Equipments
2.1 Sound Macro-Economic Development 
2.2 Huge Potential 
2.3 Policy Support 

3. Waste Heat Boiler Development 
3.1 Market Features 
3.2 Market Scale 
3.3 Competition Pattern 
3.4 Cogeneration Calculation of Major Related Industries 
3.4.1 Steel Industry 
3.4.2 Coking Industry 
3.4.3 Cement Industry 

4. Development of Lithium Bromide Refrigerator (Heat Pump) Industry
4.1 Status Quo 
4.2 Market Scale 
4.3 Competition Pattern
4.4 Development Prospect 

5. Development of Screw Expander Industry 
5.1 Status Quo 
5.2 Economic Benefits 
5.3 Competition Pattern

6. Key Waste Heat Utilization Equipment Companies 
6.1 Suzhou Hailu Heavy Industry
6.1.1 Profile
6.1.2 Operation 
6.1.3 Main Business
6.1.4 Gross Margin 
6.1.5 R&D Expenditure 
6.1.6 Clients & Suppliers 
6.1.7 Business Strategy 
6.2 Hangzhou Boiler Group
6.2.1 Profile
6.2.2 Operation
6.2.3 Main Business
6.2.4 Gross Margin
6.2.5 Orders 
6.2.6 Clients & Suppliers
6.2.7 Development Edge 
6.3 Shuangliang Group
6.3.1 Profile
6.3.2 Operation
6.3.3 Main Business
6.3.4 Gross Margin
6.3.5 Main Products
6.3.6 Clients & Suppliers
6.3.7 Development Edge
6.4 Jiangsu Taihu Boiler
6.4.1 Profile
6.4.2 Main Products
6.4.3 Development Edge
6.5 Sichuan Crun
6.5.1 Profile 
6.5.2 Operation
6.5.3 Main Business
6.5.4 Main Products
6.5.5 Gross Margin
6.5.6 Clients & Suppliers
6.5.7 R&D Expenditure
6.5.8 Development Edge & Strategies 
6.6 Wuxi Huaguang Boiler
6.6.1 Profile
6.6.2 Operation
6.6.3 Main Business
6.6.4 Main Products
6.6.5 Output & Sales and Orders
6.6.6 Gross Margin
6.6.7 Development Strategy 
6.7 Zhejiang Kaishan Compressor 
6.7.1 Profile
6.7.2 Operation
6.7.3 Main Business
6.7.4 Main Products
6.7.5 Gross Margin
6.7.6 Cost Analysis
6.7.7 R&D Expenditure
6.7.8 Clients & Suppliers
6.7.9 Development in 2012-2013
6.8 EBARA
6.8.1 Profile
6.8.2 Operation
6.8.3 Yantai EBARA
6.8.4 Main Products
6.8.5 Development Edge
6.9 Shanghai Hanbell Precise Machinery
6.9.1 Profile
6.9.2 Operation
6.9.3 Main Business
6.9.4 Gross Margin
6.9.5 R&D Expenditure
6.9.6 Cost Analysis
6.9.7 Clients & Suppliers
6.9.8 Main Products
6.10 Jiangxi Huadian Electric Power
6.10.1 Profile
6.10.2 Main Products
6.10.3 Major Application Projects 

List of Tables

NA

List of Figures

NA

Upcoming Reports:

Synthetic Lubricants Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2013 - 2019
By - Transparency Market Research
Lubricants are substances that are utilized to reduce the friction between the two moving or sliding surfaces. Main objective of the lubricant is to keep the two moving or sliding surfaces aside in order to decrease the friction and reduce the continuous destruction of materials. The process of reducing the friction between the two moving or sliding surfaces through the introduction of lubricants is called as lubrication. Key functions of lubricants are to reduce wear and tear of the surfaces by avoiding direct metal to metal contact, they acts as a coolant, it lowers down power loss in...
Photocopiers Market - Global Industry Size, Market Share, Trends, Analysis And Forecasts, 2012 - 2018
By - Transparency Market Research
A photocopier is a machine that makes paper copies of documents and other visual images quickly and cheaply. Photocopying is widely used in business, education, and government. The biggest differentiators in the industry are the penetration, distribution strength and efficient after-sales-support. The photocopier demand has been to a large extent fuelled by the growth in the services sector, with banks and multinational companies leading the way. The future is likely to be in developing India as a manufacturing base and in providing comprehensive services to customers....
Thermoformed Plastics Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2012 - 2018
By - Transparency Market Research
Thermoformed plastics are plastics used in the process of thermoforming where a plastic sheet is heated to a bendable form so that the plastic can be molded into a desired shape which is then cooled to form a finished usable product. There are different types of processes available for thermoforming plastics, the common ones being plug assist forming, vacuum snapback and thick and thin gauge thermoforming. The regularly used polymers for thermoforming include acrylonitrile butadiene styrene (ABS), high impact polystyrene (HIPS), polypropylene (PP) and polymethyl methacrylate...

Research Assistance

We will be happy to help you find what you need.
Please call us or write us:

866-997-4948 (Us-Canada Toll Free)
Tel: +1-518-618-1030
Email: sales@researchmoz.us
Select License type:

Share this report

Related News

Western Africa economies hit by Ebola travel ban
Aug 28, 2014  
With over 1,400 people dead due to the fatal Ebola outbreak in African countries, travel services have either banned or limited operations to the western region, severely hitting economies of the area. Budgetary resources are being utilized rapidly and economic growth has dropped by 4% as international projects and trips have been cancelled. Transport companies have cut off the region...
Fonterra Ties Up With Beingmate to Tap into China’s Baby Food Market
Aug 28, 2014  
Fonterra Co-Operative Group Ltd. will partner with Beingmate Group Co, China’s biggest infant formula manufacturer to increase its reach in the Chinese market. The New Zealand-based company makes this move with the intent to grab a bigger market share in China after it suffered many setbacks in the food-safety scandal last year.   This partnership will also help Beingmate...
Chinas Leading Asset-Management Company Aims for IPO
Aug 28, 2014  
China’s biggest asset-management company plans to go public by the end of 2015. Chinese authorities are constantly ramping up their interests towards introducing mixed ownership to state-owned huge companies and call for more private capital investments into the economy. According to the news report, China Huarong Asset Management Co., Ltd. will collaborate with eight investors...
Warren Buffet Helps Burger King with Tim Horton Deal
Aug 27, 2014  
Renowned investor Warren Buffet plans to finance Burger King Worldwide Inc.’s acquisition of Tim Hortons Inc., the Canadian coffee chain. Berkshire Hathaway Inc., Warren Buffet’s firm will invest through preferred shares, it is speculated. Nearly 25% of the deal’s financing would be handled by Berkshire. The precise aim for Warren Buffet’s participation is yet...
Anti-UAW Workers to Form Another Union at Volkswagen Plant
Aug 27, 2014  
Employees at the Chattanooga plant of Volkswagen AG are trying to form a union of company’s salaried and hourly workers, as a means to counter the United Auto Workers Local 42 union that was established last month.  The new union is expected to force Volkswagen in rethinking and holding another vote to determine which union is favored by hourly employees. UAV had earlier...