ResearchMoz

China Printing and Dyeing Auxiliary Industry Report, 2012-2015

Research In China
Published Date » 2013-03-31
No. Of Pages » 82

Printing and dyeing auxiliaries refer to the auxiliary chemicals added during textile printing and dyeing to improve the processing technology, operational efficiency, textile quality and performance. Printing and dyeing auxiliaries fall into the category of textile auxiliaries, with major varieties including leveling agent, defoamer, dispersant, binding agent, fixing agent, etc.

Since 1990, with the rise in the cost of labor and pollution control in the United States and Europe, the global printing and dyeing industry has gradually transferred from the United States, Western Europe and Japan to the developing countries in the Asia-Pacific region. At present, the Asia-Pacific region is already the world's largest producing area of printing and dyeing auxiliaries.

In 2006-2012, China’s printing and dyeing auxiliary output generally showed an upward trend, with a CAGR of 8.8%. In 2012, the output was 1.346 million tons, accounting for about 30% of the global output. China’s printing and dyeing auxiliary industry has a self-sufficiency rate of over 85%, but still relies heavily on the import of dedicated and high-end printing and dyeing auxiliaries. 

There are 2,000-3,000 printing and dyeing auxiliary producers in China. The market is highly fragmented, private enterprises occupy a dominant position, while joint ventures and foreign wholly-owned enterprises each hold about 10%. Zhejiang Transfar and Dymatic Chemicals are leading enterprises in China’s printing and dyeing auxiliary industry, with an annual capacity of 160 kilotons and 130 kilotons in 2012 respectively. With the accelerated structural adjustment of China’s printing and dyeing auxiliary industry, high-end, eco-friendly textile auxiliaries have become the key to the sustainable development of the industry, and the foreign-funded enterprises and domestic leading enterprises with advanced production technology and strong R&D strength have obvious advantage.

As printing and dyeing auxiliaries are used for textile printing and dyeing, the development and prosperity of the printing and dyeing industry directly affect the market of printing and dyeing auxiliaries. In 2006-2012, China’s printing and dyeing cloth output maintained a CAGR of 4.7%, and reached 56.6 billion meters in 2012. China’s printing and dyeing cloth production is quite concentrated, with top five producing regions (Zhejiang, Fujian, Jiangsu, Guangdong and Shandong) accounting for more than 90% of the national output.

There are many enterprises in China’s printing and dyeing industry, and the market competition is intense. Since 2010, China has accelerated the elimination of small and backward printing and dyeing enterprises, gradually enhancing the industry concentration. At present, Hangmin, Zhonghe and Sanfangxiang are major enterprises in China’s printing and dyeing industry. Hangmin is an industry leader in terms of production technology, capacity and R & D capabilities.
Table of Content

1. Overview of Printing and Dyeing Auxiliary Industry
1.1 Definition and Application
1.2 Classification
1.3 Industry Chain
1.4 Industry Overview

2. China Printing and Dyeing Auxiliary Industry 
2.1 Development Status
2.2 Policy Environment
2.3 Supply and Demand 
2.4 Competition Pattern
2.5 Import and Export 
2.6 Development and Forecast
2.6.1 Development Trend
2.6.2 Supply and Demand Forecast

3. Economic Operation of China Printing and Dyeing Industry 
3.1 Operation 
3.2 Supply 
3.3 Investment
3.4 Import and Export 
3.5 Development and Forecast
3.5.1 Development Trend
3.5.2 Supply Forecast

4. Key Enterprises 
4.1 Zhejiang Transfar Co., Ltd.
4.1.1 Profile
4.1.2 Operation
4.1.3 Revenue Structure 
4.1.4 Gross Margin 
4.1.5 Customers 
4.1.6 Printing and Dyeing Auxiliary Business 
4.1.7 Forecast and Prospect 
4.2 Dymatic Chemicals Inc.
4.2.1 Profile
4.2.2 Operation 
4.2.3 Revenue Structure 
4.2.4 Gross Margin 
4.2.5 Customers and Suppliers
4.2.6 Printing and Dyeing Auxiliary Business 
4.2.7 Forecast and Prospect 
4.3 Zhejiang Longsheng Group Co., Ltd.
4.3.1 Profile
4.3.2 Operation 
4.3.3 Revenue Structure 
4.3.4 Gross Margin 
4.3.5 Customers 
4.3.6 Printing and Dyeing Auxiliary Business 
4.3.7 Forecast and Prospect 
4.4 Zhejiang Runtu Co., Ltd.
4.4.1 Profile
4.4.2 Operation 
4.4.3 Revenue Structure 
4.4.4 Gross Margin 
4.4.5 Customers 
4.4.6 Printing and Dyeing Auxiliary Business 
4.4.7 Forecast and Prospect 
4.5 Shanghai Anoky Textile Chem Co., Ltd.
4.5.1 Profile
4.5.2 Operation 
4.5.3 Revenue Structure 
4.5.4 Gross Margin 
4.5.5 Customers 
4.5.6 Printing and Dyeing Auxiliary Business 
4.5.7 Forecast and Prospect 
4.6 Zhejiang Hangmin Co., Ltd.
4.6.1 Profile
4.6.2 Operation 
4.6.3 Revenue Structure 
4.6.4 Gross Margin 
4.6.5 Customers 
4.6.6 Printing and Dyeing Business 
4.6.7 Forecast and Prospect 
4.7 Zhonghe Co., Ltd.
4.7.1 Profile
4.7.2 Operation 
4.7.3 Revenue Structure 
4.7.4 Gross Margin 
4.7.5 Printing and Dyeing Business 
4.7.6 Forecast and Prospect 
4.8 Jiangsu Sanfangxiang Industry Co., Ltd.
4.8.1 Profile
4.8.2 Operation 
4.8.3 Revenue Structure 
4.8.4 Gross Margin 
4.8.5 Printing and Dyeing Business 
4.8.6 Forecast and Prospect 
4.9 Sunichem Group
4.9.1 Profile
4.9.2 Operation 
4.9.3 Printing and Dyeing Auxiliary Business 
4.10 Hangzhou Meigao Huayi Chemical Co., Ltd. (MG Chemical) 
4.10.1 Profile
4.10.2 Operation 
4.10.3 Printing and Dyeing Auxiliary Business 
4.11 Shanghai Daxiang Chemical Industry Co., Ltd.
4.11.1 Profile
4.11.2 Operation 
4.11.3 Printing and Dyeing Auxiliary Business 
4.12 Zhejiang Hongda Chemicals Co., Ltd. 

List of Tables


List of Figures

Upcoming Reports:

Cast Removal Devices Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2013 - 2019
By - Transparency Market Research
The cast removal devices are instruments used for cutting casting material such as orthopedic plaster. These devices possess properties such as high cutting torque and low material speed. The devices are further classified in three categories in accordance to their method of application for cutting such as hand handled device, advanced device and bottom edge device. The hand handled devices cut the orthopedic casts without noise with a few or no debris generation however advanced devices maintain the velocity of the equipment throughout the cast. The bottom edge devices are designed to cut...
Coated Paper Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2013 - 2019
By - Transparency Market Research
Companies in coated paper market manufacture products that include coated and laminated paper, uncoated paper sacks and bags, laminated and coated packaging paper, laminated foil, plastic foil, surface-coated paperboard and coated paper bags. In this industry the raw materials are paper and paperboard and these are processed with plastic, latex, clay and metal to create products. Coated wood-free paper is the most popular product. Light weight coated (LWC) papers market has seen increasing demand due to grade competition, changed market conditions and advanced processing methods....
Dyes And Pigments Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2013 - 2019
By - Transparency Market Research
Dyes and pigments are coloring materials, which are water insoluble. Key end-user industries of pigments include wood-coloring, stone, textiles, paints & coatings, food and metals. Pigment are usually manufactured as dry colorants and grounded into fine powder. As pigments are water insoluble it requires some special techniques for dyeing and printing. Some of the key pigments used across the world include dioxazine, fluorubine, isoindoline, perylene, perinone, and pyrocoline.  Strong demand from end user industries such as paint and coating, ink, construction...

Research Assistance

We will be happy to help you find what you need.
Please call us or write us:

866-997-4948 (Us-Canada Toll Free)
Tel: +1-518-618-1030
Email: sales@researchmoz.us
Select License type:

Share this report

Related News

Scientists Identify Cure for Dengue
Apr 18, 2014  
In a breakthrough discovery that can change the way dengue is treated, scientists have identified a drug target for the deadly dengue viruses. This discovery may help pave the way for discovery of vaccines that can cure this condition that affects nearly 390 million people throughout the world each year.  Scientists have used a new technique for this discovery to show that a region...
India is Facing a Cancer Crisis
Apr 15, 2014  
India is currently facing a cancer crisis – reports a recent research carried out at the King’s college London, in collaboration with the Tata Memorial Cancer Centre, Mumbai.  The reasons estimated for this crisis comprise of increasing rates of smoking, unequal access to proper treatment and belated diagnosis.  Every year, India witnesses around one...
Microparticle Tags to Check Counterfeit Goods Invented
Apr 14, 2014  
Researchers from the Massachusetts Institute of Technology have invented a new set of microparticles that can easily be read by smartphones and establish the authenticity of currency, electronic items and luxury goods.  This strategy is among those countless measures taken by big brands and companies to label their legitimate products in order to stop illegal copies of the...
USFDA Approves Lupins Generic Diabetic Drug
Apr 10, 2014  
The United States Food and Drugs Administration (USFDA) has finally approved Lupin Pharmaceuticals Inc (LPI), the American subsidiary of Indian drug manufacturers Lupin Ltd, to sell Pioglitazone Tablets in the U.S market. The approval has been granted first for fiscal 2015.  Pioglitazone is a generic medicine used for managing diabetes and is a version of Actos tablets...
Infrared Sensors can Soon Be Used to Develop Night-Vision Lenses - A New Discovery Confirms
Apr 8, 2014  
People who fear the dark may soon have a reason to rejoice – an infrared sensor that can eventually be used for mechanizing night-vision lenses has been developed. This effectively means that one can also see through dark with the help of these lenses.  This technology seems possible all due to graphene, a layer of tightly packed carbon atoms that has allowed the creation of...