ResearchMoz

China Modified Plastics Industry Report, 2013 - 2015

Research In China
Published Date » 2014-03-27
No. Of Pages » 63
 Development of modified plastics industry in China started in the 1990s. Before 1990s, China's modified plastics were almost imported. During 2000-2009, China’s output of modified plastics showed an AAGR of 33%, but in 2010-2012 it was down to 16.7%. China's output of modified plastics was estimated at 7.3 million tons or so in 2013, up only 10.6% YoY. 
   
 Home appliance and automobile are the major consumers of modified plastics in China. In 2013, the modified plastics used for home appliance and for automobile accounted for 38.2% and 30.9% respectively of total consumption in China. the slowdown in the growth rate of China's modified plastics output over recent three years is mainly as a result of the shrunk demand from Chinese home appliance industry. In the future, the...
Table of Content

1. Overview of Modified Plastics Industry
1.1 Definition and Classification
1.1.1 Definition
1.1.2 Classification
1.2 Industry Chain
1.2.1 Overview
1.2.2 Upstream

2. Modified Plastic Market
2.1 Supply
2.2 Demand
2.3 Competition Pattern
2.3.1 Major Foreign-funded Manufacturers
2.3.2 Major Local Manufacturers
2.4 Policies

3. Downstream Application of Modified Plastics
3.1 Market of Modified Plastics for Home Appliances
3.1.1 Application of Modified Plastics in Home Appliances
3.1.2 Demand Forecast
3.2 Market of Modified Plastics for Automobile
3.2.1 Overview
3.2.2 Demand
3.2.3 Market Scale
3.2.4 Competition Pattern
3.3 Market of Modified Plastics for Energy-saving Lighting
3.3.1 Market Scale
3.3.2 Major Manufacturers
3.4 Market of Modified Plastics for Wire & Cable
3.4.1 Overview
3.4.2 Major Manufacturers

4. Key Enterprises
4.1 Kingfa Sci. &Tech.Co., Ltd.
4.1.1 Profile
4.1.2 Operation
4.1.3 Revenue Structure
4.1.4 Gross Margin
4.1.5 Customers and Suppliers
4.1.6 Modified Plastics Business
4.1.7 Development Plan for 2012-2016
4.1.8 Forecast and Outlook
4.2 China XD Plastics Company Limited
4.2.1 Profile
4.2.2 Operation
4.2.3 Modified Plastics Business
4.2.4 Revenue Structure
4.2.5 Gross Margin
4.2.6 R&D
4.2.7 Capacity Expansion Plan
4.3 PRET
4.3.1 Profile
4.3.2 Operation
4.3.3 Revenue Structure
4.3.4 Gross Margin
4.3.5 R&D and Investment
4.3.6 Customers and Suppliers
4.3.7 Forecast and Prospect
4.4 Guangdong Silver Age Sci & Tech. Co., Ltd
4.4.1 Profile
4.4.2 Operation
4.4.3 Revenue Structure
4.4.4 Gross Margin
4.4.5 Customers and Suppliers
4.4.6 R&D and Investment
4.4.7 Modified Plastics Business
4.4.8 Forecast and Outlook
4.5 Super-Dragon Engineering Plastic Co., Ltd
4.6 Haier New Material R&D Co., Ltd
4.7 Beijing JuLingYan Plastic Co., Ltd
4.8 Shanghai Kumho Sunny Plastics Co., Ltd
4.9 Suzhou Xuguang Polymer Co., Ltd
4.10 Nanjing Jinshan Automobile Engineering Plastic Co., Ltd
4.11 Guangzhou KeYuan Innovative Materials Co., Ltd
4.12 Hengdian Group Tospo Engineering Plastics Co., Ltd
4.13 Kequan Plastic (Shenzhen) Co., Ltd
4.14 Dongguan Ngai Hing Plastic Materials Co., Ltd
4.15 Zhejiang Juner New Materials Co., Ltd
4.16 Jiangyin Jihua New Material Co., Ltd
4.17 Nantong Xingchen Synthetic Material Co., Ltd
4.18 Shanghai Genius Advanced Material Co., Ltd
4.18.1 Profile
4.18.2 Subsidiaries

5 Summary and Forecast

List of Tables


List of Figures

Upcoming Reports:

Foot & Ankle Devices Market - Global Industry Analysis, Size, Share, Growth, Trends And Forecast 2013 - 2019
By - Transparency Market Research
Foot and ankle devices are used to restore one or more functions of the human foot or ankle system. The foot and ankle devices market include all those devices which are used in ligament repair and reconstruction procedures including arthrodesis, joint replacement and internal fixation. The global foot and ankle devices market is analyzed by categorizing orthopedic implants and surgical devices, prosthetics and bracing and supports market. Based on orthopedic implant and device types, the foot and ankle devices market is classified into fixations devices, joint implants and soft...
Dental Diagnostic Equipment Market - Global Industry Size, Market Share, Trends, Analysis And Forecasts 2012 - 2018
By - Transparency Market Research
The market for dental diagnostic equipments consists of devices used in the diagnosis of dental diseases and conditions, so as to enable proper treatment planning. These include intraoral and extraoral radiology equipments and scanners.  Consumption of unhealthy food and improper eating habits has led to an increased incidence of oral diseases worldwide. A growing consumer base opting for dental treatments accompanied by a rise in the number of dental clinics providing such treatment, fuels continuous market growth for this segment. Patients demand painless diagnosis...
Poland: yoghurt market
By - Williams and Marshal Strategy
This report presents a comprehensive overview of the yoghurt market in Poland and its state as of January 2014. It provides detailed analysis of the industry, its dynamics and structure. The purpose of the report is to describe the state of the yoghurt market in Poland, to present actual and retrospective information about the volumes and dynamics of production, imports, exports and consumption, the characteristics of the market for the period 2008-2012 and to build a forecast for the market development until 2018. In the same way, the report presents an elaborate overview of the main...

Research Assistance

We will be happy to help you find what you need.
Please call us or write us:

866-997-4948 (Us-Canada Toll Free)
Tel: +1-518-618-1030
Email: sales@researchmoz.us
Select License type:

Share this report

Related News

World Cup Stadium at Qatar to be Renovated for 2022 FIFA World Cup
Nov 26, 2014  
The design for renovation of the Khalifa International Stadium will soon be unveiled by the organization that is responsible for building the infrastructure and stadiums for the 2022 FIFA World Cup Qatar. The main construction work on the stadium is being looked into by two prominent construction companies. The joint venture is between Six Construct and Midmac Contracting. Six Construct is a...
DOD Spending Low, Corps Look for More Work in Alaska
Nov 24, 2014  
Military construction across Alaska continues to decline. Government contractors expect to keep busy for the time being with work delegated by other federal agencies. The United States Army Corps of Engineers expects to have more than US$410 million worth of work available on at least 400 projects in the 2015 fiscal year. Chris Tew, the Alaska Contracting Division chief said that is...
China Consumer Products Fair Kicks-Off in Abu Dhabi
Nov 24, 2014  
Seeking to market products in the United Arab Emirates (UAE) and Mena regions, more than 100 consumer goods makers from China showcased their mid-to-high-end consumer goods at the China Consumer Products Fair. The second edition of the China Consumer Products Fair 2014 began on Monday in Abu Dhabi’s National Exhibition Center (Adnec). The event was officially inaugurated by the Economic...
Ford Recalls 65,000 Fusion Models Due to Issues in Ignition Key
Nov 20, 2014  
If anything defines the world of automobiles currently, it would be recalls. It seems that a flood of automobiles has surrounded the global automobiles industry, which once represented a flourishing and highly profitable industry.  The current automobile giants ordering yet another recall is Ford Motors Co. Ford declared on Tuesday that it is recalling nearly 65,000 sedans from...
3D Printed Heart Model for Better Cardiological Treatment
Nov 20, 2014  
According to research carried out by the American Heart Association’s Scientific Sessions 2014, surgeons will be able to treat complex heart disorders in patients, with the help of a three dimensional experimental printed model of the heart. For surgical planning, most cardiac surgeons make use of two dimensional images of the heart taken by MRI, ultrasound, and X-ray. But the problem is...