ResearchMoz

China Hazardous Waste Disposal Industry Report, 2013-2016

Research In China
Published Date » 2014-03-25
No. Of Pages » 78
 China is a big producer of industrial hazardous waste. With the issuance of environmental protection policies, technological upgrading, etc., China’s utilization and standardized disposal of hazardous waste has been significantly improved over recent years, with the stock of hazardous waste substantially reduced. It was estimated that China produced 40 million tons of industrial hazardous waste in 2013, representing an increase of 15.4 % over the previous year; the waste utilization volume hit 24 million tons, up 19.7 % year on year; the disposal volume rose by 1% year on year to 7.05 million tons; and the inventory reached 8 million tons, down 5.4 % from last year. 
   
 The 12th Five-year Hazardous Waste Pollution Prevention and Control Plan requires that certified companies...
Table of Content

1. Overview of China Hazardous Waste Disposal Industry  
1.1 Definition and Classification 
1.2 Industrial Characteristics
1.2.1 Policy Guidance
1.2.2 Franchising 
1.2.3 Regionality
1.2.4 Seasonal Cycle

2. Status Quo of China Solid Waste Disposal Industry
2.1 Industrial Solid Waste Generation
2.2 Geographical Distribution of Solid Waste Generation 
2.3 Solid Waste Disposal
2.4 Geographical Distribution of Industrial Solid Waste Processing

3. Status Quo of China Hazardous Waste Disposal Industry
3.1 Development Environment 
3.1.1 Policy  
3.1.2 Industry  
3.1.3 Technology  
3.2 Hazardous Waste Generation
3.3 Geographical Distribution of Hazardous Waste Generation
3.4 Hazardous Waste Disposal  
3.5 Geographical Distribution of Hazardous Waste Disposal
3.6 Regional Competition
3.6.1 Pearl River Delta
3.6.2 Yangtze River Delta
3.7 Corporate Competition

4. Upstream and Downstream of China Hazardous Waste Disposal Industry  
4.1 Upstream
4.2 Downstream
4.2.1 Metals and Metal Salts
4.2.2 Copper Price

5. Key Chinese Hazardous Waste Disposal Enterprises 
5.1 Dongjiang Environment 
5.1.1 Profile 
5.1.2 Operation 
5.1.3 Revenues Structure 
5.1.4 Gross Margin 
5.1.5 Development Prospect and Forecast
5.2 Kunshan Qiandeng Three-waste Purifying
5.2.1 Profile 
5.2.2 Operation 
5.3 Sound Environmental Resources 
5.3.1 Profile 
5.3.2 Operation 
5.3.3 Revenues Structure 
5.3.4 Business Development
5.4 Green Eco-Manufacture (GEM)
5.4.1 Profile 
5.4.2 Operation 
5.4.3 Revenues Structure 
5.4.4 Business Development
5.5 Wuxi Zhonghuan Resource Recycling
5.5.1 Profile 
5.5.2 Operation 
5.6 Kunshan Zhonghuan Industry 
5.6.1 Profile 
5.6.2 Operation 
5.7 Jiangyin Zhongxin Resource Recycling
5.7.1 Profile 
5.7.2 Operation 
5.8 Kunshan Zhongyue Solid Waste Treatment
5.8.1 Profile 
5.8.2 Operation 
5.9 Zhuhai Dongsong 
5.9.1 Profile 
5.9.2 Operation 
5.9.3 Business Development
5.10 Ruanshi Chemical
5.10.1 Profile 
5.10.2 Operation 
5.10.3 Business Development
5.11 Wuxi Jiangfeng 
5.11.1 Profile 
5.11.2 Operation 
5.11.3 Business Development
5.12 Kunshan Dayang
5.12.1 Profile 
5.12.2 Operation 
5.12.3 Business Development
5.13 Kunshan Yasheng 
5.13.1 Profile 
5.13.2 Operation 
5.13.3 Business Development
5.14 Wujiang Lili 
5.14.1 Profile 
5.14.2 Operation 
5.14.3 Business Development
5.15 Guangzhou Lu You Environmental 
5.15.1 Profile 
5.15.2 Business Development
5.16 Shenzhen Hazardous Waste Treatment Station
5.16.1 Profile 
5.16.2 Business Development
5.17 Others 
5.17.1 Guangzhou Solid Waste Safe Disposal Center
5.17.2 Dalian Dongtai 
5.17.3 Guangdong OMEET 

6. Development Trend

List of Tables


List of Figures

Upcoming Reports:

Light Detection And Ranging (LiDAR) Market - Global Industry Analysis, Market Size, Share, Trends, Analysis, Growth And Forecast, 2013 - 2019
By - Transparency Market Research
The term LiDAR stands for Light Detection and Ranging which has been derived from term RADAR (Radio Detection and Ranging). LiDAR is used to examine or study the surface of the Earth with the help of remote sensing method. Remote sensing is the science of attaining information about areas or objects from a distance, mainly from the satellites or aircraft. LiDAR uses light in the form of pulsed laser to measure the distances. These light pulses are combined with the data recorded by the airborne system to generate accurate 3D information about the surface and shape of the Earth. ...
Food Flavoring Market - Global Industry Size, Market Share, Trends, Analysis, And Forecast, 2013 - 2019
By - Transparency Market Research
Food Flavors is a substance that is used to give food flavors thus altering the characteristics of the solute. It gives food sweet, tangy, sour, bitter, salty or pungent taste. Flavorings  (also called as Flavorants) is usually used to give flavor to natural food products such as vegetables or meat. It also creates flavor for food that do not possess desired flavors or has undesirable taste such as snacks and candies. Mostly flavors are focused on taste and scent. Salt and sugar are also considered as flavorants since they are used to enhance sweet and salty tastes. Food flavors have...
Desalter Market - Global Industry Analysis, Size, Share, Trends, Analysis, Growth And Forecast, 2013 - 2019
By - Transparency Market Research
Desalter is a part of processing unit in an oil refinery. It is the first unit where raw crude is processed before processing it into crude distillation unit. Salts in crude are generally contained in residual water suspended in oil phase. Desalter is used to remove salt, water, sediment and suspended solids. These impurities are removed from the crude in order to prevent corrosion to other units, to avoid fouling and coking, to avoid high energy consumption effected by sediments and suspended solid, to avoid catalyst poisoning, etc. a desalting system consist of a mixing device and an...

Research Assistance

We will be happy to help you find what you need.
Please call us or write us:

866-997-4948 (Us-Canada Toll Free)
Tel: +1-518-618-1030
Email: sales@researchmoz.us
Select License type:

Share this report

Related News

World Cup Stadium at Qatar to be Renovated for 2022 FIFA World Cup
Nov 26, 2014  
The design for renovation of the Khalifa International Stadium will soon be unveiled by the organization that is responsible for building the infrastructure and stadiums for the 2022 FIFA World Cup Qatar. The main construction work on the stadium is being looked into by two prominent construction companies. The joint venture is between Six Construct and Midmac Contracting. Six Construct is a...
DOD Spending Low, Corps Look for More Work in Alaska
Nov 24, 2014  
Military construction across Alaska continues to decline. Government contractors expect to keep busy for the time being with work delegated by other federal agencies. The United States Army Corps of Engineers expects to have more than US$410 million worth of work available on at least 400 projects in the 2015 fiscal year. Chris Tew, the Alaska Contracting Division chief said that is...
China Consumer Products Fair Kicks-Off in Abu Dhabi
Nov 24, 2014  
Seeking to market products in the United Arab Emirates (UAE) and Mena regions, more than 100 consumer goods makers from China showcased their mid-to-high-end consumer goods at the China Consumer Products Fair. The second edition of the China Consumer Products Fair 2014 began on Monday in Abu Dhabi’s National Exhibition Center (Adnec). The event was officially inaugurated by the Economic...
Ford Recalls 65,000 Fusion Models Due to Issues in Ignition Key
Nov 20, 2014  
If anything defines the world of automobiles currently, it would be recalls. It seems that a flood of automobiles has surrounded the global automobiles industry, which once represented a flourishing and highly profitable industry.  The current automobile giants ordering yet another recall is Ford Motors Co. Ford declared on Tuesday that it is recalling nearly 65,000 sedans from...
3D Printed Heart Model for Better Cardiological Treatment
Nov 20, 2014  
According to research carried out by the American Heart Association’s Scientific Sessions 2014, surgeons will be able to treat complex heart disorders in patients, with the help of a three dimensional experimental printed model of the heart. For surgical planning, most cardiac surgeons make use of two dimensional images of the heart taken by MRI, ultrasound, and X-ray. But the problem is...