ResearchMoz

3D Printing in Medical Applications Market (Medical Implants (Dental, Orthopedic, Cranio-maxillofacial), Surgical Guides, Surgical Instruments, Bio-engineered Products) - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2013 - 2019

Transparency Market Research
Published Date » 2013-08-29
No. Of Pages » 112
 
 Since its introduction over a decade ago, 3D printing as a technology has revolutionized manufacturing as a process. Ever increasing cost pressures on medical device manufacturers and their intense need to introduce innovative products has forced them to adopt 3D printing as a means to reduce the manufacturing life cycle and almost completely eliminate the traditional prototyping process. Traditional manufacturing techniques are based on the subtractive method where, the required product is created by cutting or drilling of the base material. 3D printing builds the desired products layer-by-layer through addition of materials. Hence, this process is also called as additive manufacturing. Although, 3D printing is actually a subset of additive manufacturing, it used synonymously with...
Table of Content

Chapter 1 Introduction
1.1 Report  Description
1.2 Research Methodology
1.2.1 Sources
1.2.2 Comparative Analysis: Global 3D Printing Market, by Applications, 2012 & 2019 (Value %)

Chapter 2 Executive Summary
2.1 Market Snapshot: 3D Printing Market in Medical Applications (2012 & 2019)
2.2 Global 3D Printing Market, By Applications, 2012 (USD Million)
2.3 Global 3D Printing Market, By Technology, 2012 (USD Million)

Chapter 3 Market Dynamics
3.1 Overview
3.1.1 Global 3D Printing Market: Drivers and Restraints
3.2 Drivers
3.2.1 Technological Advances to Broaden the Scope of Medical Applications
3.2.2 Government Funding to Propel the Growth of this Industry
3.2.3 Rise in the Number of Medical Applications
3.2.4 Rise in the Trend for Customized 3D Printing Medical Products
3.2.5 Reduction in Time and Costs of Medical Procedures coupled with Improved Patient Care
3.3 Restraints
3.3.1 Material Development & Characterization
3.3.2 Lack of Trained Professionals
3.4 Opportunities
3.4.1 Participation of Small Companies
3.4.2 Positive Growth by Mergers & Acquisitions
3.5 Porters Five Forces Analysis for the Global 3D Printing Market for Medical Applications
3.5.1 Bargaining Power of Suppliers
3.5.2 Bargaining Power of Buyers
3.5.3 Threat of New Entrants
3.5.4 Threat of Substitutes
3.5.5 Competitive Rivalry
3.6 Market Attractiveness Analysis
3.6.1 Market Attractiveness Analysis: Global 3D Printing Market for Medical Applications, By Geography 
3.7 Market Share Analysis of Key Players
3.7.1 Global 3D Printing Market Share Analysis of Key Players, 2012 (%)

Chapter 4 Global 3D Printing Market, by Medical Applications
4.1 Overview
4.1.1 Global 3D Printing in Medical Applications Market Revenues, by Applications, 2011-2019 (USD Million
4.1.2 Market Segmentation of 3D Printing, by Medical Applications
4.2 Implants
4.2.1 Global 3D Printing in Implants Market Revenue, by Types, 2011-2019 (USD Million)
4.2.2 Dental Implants
4.2.3 Orthopedic Implants
4.2.4 Cranio-maxillofacial Implants
4.3 Bio-engineering
4.3.1 Global 3D Printed Bioengineering Products Market Revenues, 2011 – 2019 (USD Million)
4.4 Surgical Guides
4.4.1 Global 3D Printing in Surgical Guide Market Revenues, by Types, 2011-2019 (USD Million)
4.4.2 Orthopaedic Surgical Guides
4.4.3 Dental Surgical Guides
4.4.4 Cranio-maxillofacial Surgical Guides
4.5 Surgical Instruments
4.5.1 Global 3D Printed Surgical Instruments Market Revenues, 2011 – 2019 (USD Million)

Chapter 5 Global 3D Printing Market, by Technology
5.1 Overview
5.1.1 Market Segmentation of 3D Printing, by Technology
5.1.2 Global 3D Printing Technology Market Revenues, by Types, 2011-2019 (USD Million)
5.2 Electron Beam Melting (EBM)
5.2.1 Global Electron Beam Melting Market Revenues, 2011 – 2019 (USD Million)
5.2.2 Global Electron Beam Melting Market Revenues, by Applications, 2011-2019 (USD Million)
5.3 Laser Beam Melting (LBM)
5.3.1 Global Laser Beam Melting Market Revenues, 2011 – 2019 (USD Million)
5.3.2 Global Laser Beam Melting Market Revenues, by Applications, 2011-2019 (USD Million)
5.4 Photopolymerization
5.4.1 Global Photopolymerization Market Revenues, by Types, 2011-2019 (USD Million)
5.4.2 Global Photopolymerization Market Revenues, by Applications, 2011-2019 (USD Million)
5.4.3 Stereolithography (SLA)
5.4.4 Digital Light Processing (DLP)
5.4.5 Two-photon Polymerization (TPP)
5.5 Droplet Deposition Manufacturing
5.5.1 Global Droplet Deposition Manufacturing Market Revenues, by Types, 2011-2019 (USD Million)
5.5.2 Global Droplet Deposition Manufacturing Market Revenues, by Applications, 2011-2019 (USD Million)
5.5.3 Inkjet Printing (IJP)
5.5.4 Fused Deposition Modeling (FDM)
5.5.5 Multiphase Jet Solidification (MJS)

Chapter 6 Global 3D Printing Market, by Raw Materials
6.1 Overview
6.1.1 Global 3D Printing Raw Materials Market Revenues, by Types, 2011-2019 (USD Million)
6.2 Metals
6.2.1 Global Metal Market Revenues, 2011 – 2019 (USD Million)
6.3 Polymers
6.3.1 Global Polymer Market Revenues, 2011 – 2019 (USD Million)
6.4 Ceramics
6.4.1 Global Ceramic Market Revenues, 2011 – 2019 (USD Million)
6.5 Biological Cells
6.5.1 Global Biological Cells Market Revenues, 2011 – 2019 (USD Million)

Chapter 7 Global 3D Printing Market, by Geography
7.1 Overview
7.1.1 Global 3D Printing Market Revenues, by Geography, 2011-2019 (USD Million)
7.2 North America
7.2.1 North America 3D Printing Market Revenues, 2011 – 2019 (USD Million)
7.3 Europe
7.3.1 Europe 3D Printing Market Revenues, 2011 – 2019 (USD Million)
7.4 Asia Pacific
7.4.1 Asia 3D Printing Market Revenues, 2011 – 2019 (USD Million)
7.5 Rest of the World (RoW)
7.5.1 Rest of the World 3D Printing Market Revenues, 2011 – 2019 (USD Million)

Chapter 8 Company Profiles
8.1 3D Systems Corporation
8.1.1 Company Overview
8.1.2 Financial Overview
8.1.3 Product Portfolio
8.1.4 Business Strategy
8.1.5 Recent Developments
8.2 Envisiontec Gmbh
8.2.1 Company Overview
8.2.2 Financial Overview
8.2.3 Product Portfolio
8.2.4 Recent Development
8.3 Eos Gmbh Electro Optical Systems
8.3.1 Company Overview
8.3.2 Financial Overview
8.3.3 Product Portfolio
8.3.4 Business Strategy
8.3.5 Recent Developments
8.4 Materialise NV
8.4.1 Company Overview
8.4.2 Financial Overview
8.4.3 Product Portfolio
8.4.4 Recent Developments
8.5 Nanoscribe Gmbh
8.5.1 Company Overview
8.5.2 Financial Overview
8.5.3 Product Portfolio
8.5.4 Business Strategy
8.6 Stratasys Ltd.
8.6.1 Company Overview
8.6.2 Financial Overview
8.6.3 Product Portfolio
8.6.4 Business Strategies
8.6.5 Recent Developments
8.7 Voxeljet Technology Gmbh
8.7.1 Company Overview
8.7.2 Product Portfolio
8.7.3 Business Strategy

List of Tables


TABLE 1 Market Snapshot: 3D Printing Market in Medical Applications (2011 & 2019)
TABLE 2 Global 3D Printing in Medical Applications Market Revenues, by Applications, 2011 – 2019 (USD Million)
TABLE 3 Global 3D Printing in Implants Market Revenues, by Types, 2011 – 2019 (USD Million)
TABLE 4 Global 3D Printing in Surgical Guides Market Revenues, by Types, 2011 – 2019 (USD Million)
TABLE 5 Global 3D Printing Technology Market Revenues, by Types, 2011 – 2019 (USD Million)
TABLE 6 Global Electron Beam Melting Market Revenues, by Applications, 2011 – 2019 (USD Million)
TABLE 7 Global Laser Beam Melting Market Revenues, by Applications, 2011 – 2019 (USD Million)
TABLE 8 Global Photopolymerization Market Revenues, by Types, 2011 – 2019 (USD Million)
TABLE 9 Global Photopolymerization Market Revenues, by Applications, 2011 – 2019 (USD Million)
TABLE 10 Global Droplet Deposition Manufacturing Market Revenues, by Types, 2011 – 2019 (USD Million)
TABLE 11 Global Droplet Deposition Manufacturing Market Revenues, by Applications, 2011 – 2019 (USD Million)
TABLE 12 Global Raw Material Market Revenues, by Applications, 2011 – 2019 (USD Million)
TABLE 13 Global 3D Printing Market Revenues, by Geography, 2011 – 2019 (USD Million)

List of Figures


FIG. 1 Comparative Analysis: Global 3D Printing Market, by Applications, 2012 & 2019 (USD Million)
FIG. 2 Global 3D Printing Market Segmentation
FIG. 3 Global 3D Printing Market, by Applications, 2012 (USD Million)
FIG. 4 Global 3D Printing in Medical Applications Market, by Product Types, 2012 (USD Million)
FIG. 5 Global 3D Printing Market: Drivers and Restraints
FIG. 6 Porter’s Five Forces Analysis for the Global 3D Printing Market
FIG. 7 Market Attractiveness Analysis: Global 3D Printing Market, By Geography
FIG. 8 Global 3D Printing Market Share Analysis of Key Players, 2012 (%)
FIG. 9 Market Segmentation: 3D Printing Market, by Applications
FIG. 10 Global 3D Printed Dental Implants Market Revenues, 2011 – 2019 (USD Million)
FIG. 11 Global 3D Printed Orthopedic Implants Market Revenues, 2011 – 2019 (USD Million)
FIG. 12 Global 3D Printed Cranio-Maxillofacial Market Revenues, 2011 – 2019 (USD Million)
FIG. 13 Global 3D Printed Bioengineering Products Market Revenues, 2011 – 2019 (USD Million)
FIG. 14 Global 3D Printed Orthopedic Surgical Guides Market Revenues, 2011 – 2019 (USD Million)
FIG. 15 Global 3D Printed Dental Surgical Guides Market Revenues, 2011 – 2019 (USD Million)
FIG. 16 Global 3D Printed Cranio-Maxillofacial Surgical Guides Market Revenues, 2011 – 2019 (USD Million)
FIG. 17 Global 3D Printed Surgical Instruments Market, 2011-2019 (USD Million)
FIG. 18 Market Segmentation: 3D Printing Market, by Technology
FIG. 19 Global Electron Beam Melting Market Revenues, 2011 – 2019 (USD Million)
FIG. 20 Global Laser Beam Melting Market Revenues, 2011 – 2019 (USD Million)
FIG. 21 Global Stereolithography Market Revenues, 2011 – 2019 (USD Million)
FIG. 22 Global Digital Light Processing Market Revenues, 2011 – 2019(USD Million)
FIG. 23 Global Two Photon Polymerization Market Revenues, 2011 – 2019 (USD Million)
FIG. 24 Global Inkjet Printing Market Revenues, 2011 – 2019 (USD Million)
FIG. 25 Global Fused Deposition Modeling Market Revenues, 2011 – 2019 (USD Million)
FIG. 26 Global Multiphase Jet Solidification Market Revenues, 2011 – 2019 (USD Million)
FIG. 27 Global Metal Market Revenues, 2011 – 2019 (USD Million)
FIG. 28 Global Polymer Market Revenues, 2011 – 2019 (USD Million)
FIG. 29 Global Ceramic Market Revenues, 2011 – 2019 (USD Million)
FIG. 30 Global Biological Cells Market Revenues, 2011 – 2019 (USD Million)
FIG. 31 North America 3D Printing Market Revenues, 2011 – 2019 (USD Million)
FIG. 32 Europe 3D Printing Market Revenues, 2011 – 2019(USD Million)
FIG. 33 Asia Pacific 3D Printing Market Revenues, 2011 – 2019 (USD Million)
FIG. 34 Rest of the World 3D Printing Market Revenues, 2011 – 2019 (USD Million)
FIG. 35 3D System Inc., Annual Revenues: 2010 – 2012 (USD Million)
FIG. 36 Stratasys Ltd., Annual Revenues: 2010 – 2012 (USD Million)

Upcoming Reports:

Fraud Detection And Prevention (FDP) Market - Global Industry Analysis, Size, Share, Growth, Trends And Forecast, 2014 - 2020
By - Transparency Market Research
Any illegal act involving the obtaining of something of value through willful misrepresentation is called fraud. Fraud detection and prevention systems (FDP) are those software applications which are used to provide analytical solutions for detection and prevention of fraud in future. Authentication solutions and fraud analytical solutions form the core of FDP systems. FDP systems analyze data from wide range of data sources for possible inaccuracies. It analyzes patterns, anomalies and trends in the transactions. It identifies the outliers and reports the same in case of doubtful...
Stent Grafts Market - Global Industry Analysis, Size, Share, Growth, Trends And Forecast, 2013 - 2019
By - Transparency Market Research
A stent graft is a tube shaped device composed of a rigid structure called a stent (mostly a metal) and a special fabric covering the stent. A stent is a metal mesh without any covering but a stent graft has a fabric covering and is mainly used in endovascular surgeries. A stent graft is used to repair abdominal aortic aneurysm (AAA) in a procedure called as endovascular aneurysm repair (EVAR). In EVAR, a stent graft is placed inside the aorta through which the blood flows uninterruptedly, instead of flowing through the aneurysm sack which is the weak point. Stent grafts can be categorized...
Managed Equipment Services (MES) And Enterprise Compliance And Quality Management (ECQM) Market - Global Industry Analysis, Size, Share, Growth, Trends And Forecast, 2013 - 2019
By - Transparency Market Research
Managed Equipment Services (MES) and Enterprise Compliance and Quality Management (ECQM) are software and programs that deal with streamlining data in organizations. These programs are used for identifying and preventing high risk events through integration, automation and collaboration. Most ECQM software target FDA compliance in the healthcare sector to deliver information at the right places whenever required. The softwares also perform risk analysis across all value chains along with a trend analysis which is essential in preventing future quality and compliance problems. In industries...

Research Assistance

We will be happy to help you find what you need.
Please call us or write us:

866-997-4948 (Us-Canada Toll Free)
Tel: +1-518-618-1030
Email: sales@researchmoz.us
Select License type:

Share this report

Related News

Evereadys Kenya Plant to be Shut Down
Sep 30, 2014  
The largest dry-cell battery manufacturer in the region of East Africa, Eveready East Africa Ltd. intends on shutting down its one and only factory in Kenya on the 1st of October 2014. A real estate business will be started in its place. According to the Managing Director of Eveready East Africa Ltd. the plan of shutting down the plant was initiated by the board members of this company...
Sale of Apples iPhones Remains Unaffected - Supported By Consumer Feedback
Sep 29, 2014  
iPhones have been reintroduced in the global market by Apple Inc. in about 22 countries. Consumer reports and feedback basically show that due to the presence of a problem-free backing and update, these handsets are sturdy and do not bend easily. It has been observed via stress tests conducted on iPhone 6 and 6 Plus, that it requires high force and pressure to cause damage to these...
New Malware Targets Pharma Servers
Sep 29, 2014  
The electronics and communication agency Beldon has reportedly spotted a new cyber threat to the pharmaceutical industry. Called Dragonfly, the malware specifically targets intellectual property of servers in the pharmaceutical industry with the purpose of stealing information. An initial report released by ipprolifesciences.com stated the malware was targeting the energy sector....
Child’s Success Depends on Father’s Education Level: Study
Sep 24, 2014  
A father’s level of education is the strongest attribute that can determine a child’s success in academics, according to a research conducted in Britain. It also says that there is a self-reinforcing cycle of lack of achievement and poverty that is handed down from parent to child. The report was released by the Office for National Statistics and states that children are...
Orange Business Services to Extend into Internet Services
Sep 23, 2014  
Orange Business Services is set to create a business-class Internet service by extending its core VPN Business Service into VPN Business Internet. The move has been made to meet the increasing demand from multinational companies for a heavy-duty, high-performance, and secure access to Cloud and Web services on the Internet. It is the cornerstone Business VPN Internet by the Hybrid...